Anyuan
Architectural Glass
Tempered, laminated and Low-E insulating glass from a Dongguan company registered in 2017. An 81-slide supplier presentation shows cutting, tempering, heat-soaking, lamination and IGU processes. Process dimensions are supplier-published; final configurations, current document status and export arrangements are open checks.
Glass configurations, with the process limits attached.
Tempered Architectural Glass
Supplier PPT p21 lists tempering up to 2700 × 10000 mm, minimum 300 × 300 mm, thickness 4–19 mm. These are process figures, not a guarantee that every size/thickness combination can be supplied. Confirm edgework, holes, flatness, applicable safety requirements and handling before quotation.
PVB / Ionoplast Laminated Glass
The PPT describes PVB and SGP/ionoplast lamination. Its roll line is stated at maximum width 2500 mm, minimum 300 × 300 mm, from 3+3 to 19+19+19 mm glass build-ups. Confirm material grade, interlayer thickness, exact build-up and structural-use requirements. Sighted CCC copies cover specific tempered laminated products, not all laminates.
Low-E Insulating Glass Units
PPT p23 lists a Bystronic IGU line at maximum 3200 × 6000 mm, minimum 190 × 350 mm and total thickness 12–60 mm. Single, double and triple silver Low-E are supplier-described options. No configuration-specific U-value, SHGC or acoustic result is confirmed here. Earlier tempering or heat-soak stages may impose smaller limits.
Heat-Soaked Glass Processing
PPT p22 lists heat-soak capacity up to 2500 × 6000 mm. A sighted oven calibration-report cover refers to BS EN 14179-1:2016, tested March 2025. This is equipment calibration, not a certificate covering every pane. Ask for current calibration scope, loading arrangement and the batch temperature/time record.
Other Supplier-Described Products
Ceramic-frit glass, internal-blind IGU, fire-resistant glass and bullet-resistant glass appear in the supplier presentation. A 2020 bullet-resistant type-test extract is for one named model only; low-resolution fire-test extracts are not enough to confirm a rating. Request a separate complete configuration and applicable report before including these in a project.
What the registry confirms, and what stays open.
Manufacturing Appears on the Registered Scope
Registry read 2026-10-12 lists glass manufacturing, optical glass manufacturing and technical/daily-use glass products manufacturing. The company is active (存续). This confirms the registered scope; it is not an audit of the site or every operating production line.
Capital and Headcount Stated Precisely
Registered capital RMB 18 million; paid-in capital RMB 17.715 million. Social-insurance participants: 45, filing year not identified by the source. These are registry fields, not turnover, production capacity or a live employee count.
A Multi-Process Supplier Presentation
The supplied 81-slide file shows processing equipment, certificate copies, workshop imagery and project claims. Cutting, tempering, heat-soak, lamination and IGU maxima differ. A combined product must be checked along its full process route, including packing and lifting.
Two Entities Are Not One History
The PPT also describes a separately named Shenzhen company with an earlier history. This listing concerns the Guangdong entity established in 2017. Ownership, production division, certificate scope, project attribution and contractual responsibilities between the two require confirmation.
Risk Categories Disclosed
The current risk read lists two self-risk items: a service-of-process notice relating to the company suing another party, and a filing in which the company was sued. Six corporate alerts concern investors, capital and address changes. No judgment, adverse outcome or liability amount is established by these category counts.
Export Arrangements Remain Open
The scope text read this round does not include a goods import/export phrase. That alone does not establish a prohibition on export. Confirm the exporter of record, customs arrangements, contracting entity and receiving-market requirements. No shipment history or current export delivery capability has been independently verified.
What was checked — and what the check found.
CMH Verified covers the checked business identity and registered manufacturing scope. Certificate copies, test extracts, supplier process data and project statements are separately qualified. No overseas product certification, site audit, structural design approval, guaranteed capacity or current export record is represented by the registry badge.
A Dongguan glass company, identified on the record.
This listing identifies 广东安源玻璃有限公司, registered in Dongguan on 22 November 2017 as a limited liability company held by natural persons. Registry read 12 October 2026: active, registered capital RMB 18 million, paid-in RMB 17.715 million, 45 social-insurance participants with the filing year unspecified.
The supplier-provided company presentation names architectural tempered glass, laminated glass, Low-E IGU, ceramic-frit glass, internal-blind IGU and specialist glazing. Its stated equipment limits are reproduced as supplier data. Current production load, configuration performance, MOQ and lead times have not been established.
The presentation also contains Shenzhen-company history and project imagery. Those claims are not merged into the Guangdong entity, and project areas are not added together as capacity. A directly supplied domain did not yield a verifiable normal corporate page during this check; web ownership and current delivery documents remain open items.
Registration, materials and evidence, kept separate.
Guangdong entity registered
The present Guangdong company was registered on 22 November 2017; earlier Shenzhen-company history is distinct.
Supplier presentation on file
An 81-slide presentation carrying a 2025 filename includes process limits, certificates, test extracts and project claims; dates and scope are assessed document by document.
CMH registry read and listing
Identity, manufacturing scope, capital, headcount field and risk categories checked 12 October 2026. Product and export checks remain separately disclosed.
Where these glass products may fit the specification.
Window and Facade IGU Procurement
Discuss Low-E build-up, cavity, coating side, spacer, gas filling and project thermal requirements. Glass-level and whole-window results are different.
Laminated Glazing Procurement
Discuss interlayer grade and thickness, panel support, installation position and post-breakage requirements with the project professional. No structural safety conclusion is made from glass thickness alone.
Oversized Glass Enquiries
Check each process along the complete route. A large cutting or IGU maximum does not establish an equally large heat-soaked laminate.
Specialist Glazing Evaluation
Fire-resistant and bullet-resistant requests need the exact model, complete report, intended use and receiving-market assessment. Do not apply one report to every specialist product.
Sourcing guides for this category
The 27-Point China Factory Audit Checklist
Product Inspection in China Before Shipment: A Buyer's Guide
How to Request a Sample from a Chinese Factory (Without Getting Burned)
What Documents to Request From a Chinese Supplier Before Your First Order
More verified factories
Huihexin Technology
Manlide Equipment
Pengxin Electronics
Shenpuneng Electronics
Frequently Asked Questions
What does CMH Verified cover?
The checked Guangdong registry identity and manufacturing scope only. Product certification, factory operation, project compliance and export delivery are separate checks.
Can every published maximum size be combined?
No. Cutting, tempering, heat-soak, lamination and IGU processes have different limits. Confirm the complete configuration and route, plus handling and packaging.
Are the ISO and CCC documents currently verified?
Copies are sighted and their readable fields disclosed. ISO 14001/45001 copies show expiry in August 2025; renewal is requested. Other copies still require current issuer status and full scope attachments.
Is the heat-soak report a CE certificate?
No. The sighted March 2025 document is a calibration report for one oven referencing BS EN 14179-1:2016. Delivered panes require appropriate batch records and project-specific conformity documents.
Does CCC establish overseas project acceptance?
No. Product use, destination rules, applicable tests and any performance declaration or local engineering approval must be confirmed separately. Australia, EU, UK and US requirements are not interchangeable.
What are the MOQ and lead time?
Not supplied in the source materials. Send the build-up, drawings, panel quantities and target date for written confirmation before ordering.
Is the Shenzhen company the same legal entity?
No. It is separately named in the PPT. The relationship, contracting, production and certificate responsibilities must be stated; this page does not merge their histories.
Are project references independently verified?
Not this round. The presentation includes project imagery and area tables; contractual scope, delivery, attribution and permission need confirmation before a public reference case is used.
Talk to Anyuan Architectural Glass directly.
Send your country, intended use, panel dimensions and quantities, glass build-up, coating position, interlayer and cavity details, drawing, applicable standards and target date. Ask for configuration-specific reports, current certificates and attachments, process compatibility, packaging and replacement terms. CMH will route the enquiry; no overseas approval is implied.