/ Coatings · NATALYA Brand CMH-F-6TNMHNI

Kaihan

Art paint, stone paint and wall coatings under the NATALYA brand from a company registered in 2020 — registry check completed, badge stamped; production scope, capacity and certificates are the open checks.

Foshan, GuangdongEst. 2020Coatings & paintsRegistry verified
01What we build

Coatings and finishes, NATALYA-branded.

/ 001

Art Paint

Decorative art paint (艺术涂料) is the company’s primary product under the NATALYA brand. The English website uses the heading “Art Paint” alongside images of textured wall finishes. Confirm paint types (lime-based, acrylic, silicone), application methods, colour range, coverage rate, VOC content and relevant certifications for the target market.

/ 002

Stone Paint

Stone-effect coating (石材涂料) that simulates natural stone finishes on exterior and interior walls. Listed alongside art paint on the company’s website. Confirm stone textures offered, substrate compatibility, weather resistance, adhesion strength and test reports.

/ 003

Wall Coatings

Architectural wall paint (墙面涂料) for interior and exterior applications. Confirm whether this includes primer, topcoat and waterproof coatings, the resin system (acrylic, silicone-acrylic), washability cycles and VOC compliance for the intended market.

02Capabilities

What the registry confirms, and what stays open.

/ 001

NATALYA Brand

The company markets its coatings under the NATALYA brand. The English website describes itself as originating from Germany (“Originated in Germany”). No evidence of a German entity has been sighted — confirm the basis for this claim and whether it refers to formulation technology, raw materials or brand licensing.

/ 002

Established Since 2020

The company was registered on 2020-02-28 as a limited company. It has over 6 years of registration history. Registry check confirmed active status as of 2026-09-30.

/ 003

Registry Check Completed

Registration scope text, risk record and active status were all confirmed by the registry read (badge criteria met). Full details are recorded in the ChinaMakersHub registry snapshot. Note: the registered scope text does not explicitly include production, manufacturing or processing terms — confirm the company’s actual manufacturing status.

/ 004

Zero Insured Staff

The social-insurance headcount is 0 per registry records. This is the lowest possible figure for an active company. Confirm whether the company has any employees, uses contract labour, or operates as a trading entity rather than a manufacturer.

/ 005

English Website Available

An English website exists at en.fskaihan.com. The content is template-based with generic marketing copy, product images of paint tins with the NATALYA brand, but no technical data sheets or specifications. The website has no blog or news section.

03Credentials

What was checked — and what the check found.

Company Registration
佛山市凯汉新材料有限公司 · USCC 91442000MA54C1C63U (check digit passes) · registered 2020-02-28 · limited company · active · read 2026-09-30
核
Registry Check Completed
Badge stamped: registration scope text, risk record and active status all confirmed by registry read · full details in ChinaMakersHub registry snapshot
厂
Foshan (Stated)
Company name includes 佛山市 (Foshan) · USCC registration authority code 442000 · factory address to be confirmed on-site
Insured Staff: 0
Social-insurance headcount from registry records · actual production workforce to be confirmed
Export Capability
To be confirmed — ask for export references and Incoterms

The stamp rests on a registration check: the credit code passes the national check-digit rule, the company has been active since February 2020 as a limited company, and the registry scope text and risk record were both successfully read (badge criteria met). What stays open: the registered business scope does not explicitly include production, manufacturing or processing terms — the company may be a trading entity rather than a manufacturer; the social-insurance headcount is 0, which is the lowest possible figure; paid-in capital has not been disclosed; the English website is a template-based landing page with no technical content; and the factory has not been audited on-site. The “Originated in Germany” claim on the website has not been verified. What would close it: an on-site factory visit confirming production facilities and staff, technical data sheets with test results for the coatings, relevant certificates (ISO 9001, VOC compliance, REACH if targeting the EU), export references, and clarification of the Germany-origin claim.

04About

A young Foshan coatings company, read off the record.

Foshan Kaihan New Materials Co., Ltd. (佛山市凯汉新材料有限公司) was registered on 2020-02-28. The company produces art paint, stone paint and wall coatings under the NATALYA brand.

The company has over 6 years of registration history. The social-insurance headcount is 0, and the registered business scope does not explicitly include production or manufacturing terms. The English website at en.fskaihan.com is a template-based landing page with product images but no technical specifications.

What overseas buyers should confirm first: whether the company is a manufacturer or a trading company, the actual production scale (staff, factory area, equipment), paint product data sheets with performance test results, relevant quality and environmental certificates, and export experience. Contact routes through ChinaMakersHub; direct details are exchanged after first inquiry.

05Story

From registration to listing, on the record.

2020

Company registered

Registered on 2020-02-28 as 佛山市凯汉新材料有限公司, a limited company. Products marketed under the NATALYA brand.

2020–2026

6 years of registration

Active registration in coatings and new materials. English website launched at en.fskaihan.com as a template landing page.

2026

Listed on ChinaMakersHub

Registry read 2026-09-30: active, limited company, badge stamped. Insured staff 0; production scope and capacity to be confirmed.

Next

What would move it forward

An on-site factory visit, paint performance data sheets, quality certificates (ISO 9001, VOC compliance), export references, and clarification of the Germany-origin branding claim.

06Applications

Who these coatings are for.

/ 001

Interior Decoration

Art paint and textured wall coatings for residential and commercial interiors. Ask for colour range, application technique (spray, roller, trowel), coverage rate per litre, drying time and washability cycles.

/ 002

Exterior Facades

Stone-effect and weather-resistant wall coatings for building exteriors. Confirm UV resistance, water absorption, adhesion to concrete and rendered surfaces, and freeze-thaw cycle performance.

/ 003

Project & Hospitality

Decorative coatings for hotels, restaurants and commercial spaces. Ask for fire-rating test reports, custom colour-matching capability and project reference photos.

/ 004

Construction & Real Estate

Wall coatings for new-build and renovation projects. Confirm bulk pricing, on-site application support, warranty terms and compliance with local building codes for the target market.

FAQ

Frequently Asked Questions

What does Kaihan make?

Art paint, stone paint and wall coatings under the NATALYA brand, from Foshan, Guangdong.

Is it a manufacturer?

The company has been registered since 2020 as a limited company. However, the registered business scope does not explicitly include production or manufacturing terms, and the insured-staff headcount is 0. Confirm whether the company manufactures its own products, operates through contract manufacturing, or is a trading entity.

Can it export directly?

Export capability has not been confirmed. Ask for export references and preferred trade terms.

Which certificates does it hold?

None have been sighted by ChinaMakersHub. For coatings, relevant certificates may include ISO 9001 (quality management), ISO 14001 (environmental), VOC-compliance test reports (EU Directive 2004/42/EC or US state rules), REACH registration (EU), and fire-safety test reports. Request copies.

What compliance points apply to decorative coatings?

Decorative paints entering the EU must comply with Directive 2004/42/EC (VOC limits). REACH registration is required for substances above 1 tonne per year. In the United States, VOC limits vary by state (California SCAQMD being the strictest). Fire resistance may be required for commercial and hospitality applications. Formaldehyde and heavy-metal limits apply in many markets. Confirm with your compliance team which standards apply.

What did the ChinaMakersHub check find?

Run on 2026-09-30 against Chinese enterprise records: active since 2020-02-28, limited company, USCC 91442000MA54C1C63U (check digit passes). Registry scope text, risk record and active status were all confirmed (badge stamped). Insured staff: 0. Registered scope does not explicitly include production or manufacturing terms. Paid-in capital not disclosed. English website at en.fskaihan.com is a template landing page with no technical content. Factory not audited on-site.

Talk to Kaihan directly.

Send your coating specification (paint type, application surface, colour targets, coverage area, volume per order and target market). Ask for product data sheets, a sample, quality certificates, the factory address and lead time. ChinaMakersHub will route the request.

CMH Verified Supplier
ChinaMakersHub Audit Program · September 2026
Company registration confirmed统一社会信用代码 91442000MA54C1C63U · check digit passes · registered 2020-02-28 · limited company · active · read 2026-09-30
Registry scope and risk record readScope text, risk data and active status all confirmed by registry read · badge criteria met · full details in ChinaMakersHub registry snapshot
Production scope not confirmedRegistered business scope does not explicitly include production, manufacturing or processing terms — confirm whether the company manufactures or trades
Zero insured staff0 staff on social insurance per registry records — confirm actual workforce and business model
Certificates not sightedNo ISO, VOC-compliance or product-safety certifications on record — request copies
Factory not audited on-siteProduction address, factory area, equipment and capacity to be confirmed