Print
Area
Printing ink, varnish and press chemicals from a Foshan manufacturer established in 2009 — brand Ceres; ISO 9001 stated; colour-matching centre; registry check completed, badge stamped.
Ink, varnish and chemicals, colour-matched.
Offset Printing Ink
Sheet-fed and web offset inks for commercial and packaging printing. The company lists environmental (eco-friendly) formulations on its 1688 storefront and runs an in-house colour-matching centre. Confirm ink series (process, Pantone match, metallic), substrate compatibility, viscosity range and compliance certifications (EN 71, REACH, FDA 21 CFR 175/176 for food packaging).
UV & LED-UV Ink
Energy-curable inks for high-speed printing and finishing. Ask for technical data sheets showing cure speed, adhesion on non-absorbent substrates (film, foil, coated board) and migration values if the end use is food-contact packaging.
Flexographic Ink
Water-based and solvent-based flexo inks for corrugated, labels and flexible packaging. Confirm which ink systems are manufactured in-house (the 1688 listing groups flexo inks alongside offset), press compatibility and colour-strength benchmarks.
Security & Specialty Ink
Anti-counterfeit, thermochromic, fluorescent and fabric-label inks. The English website lists security ink and fabric label ink as distinct product lines under the Ceres brand. Ask for application-specific test prints and shelf-life data.
Printing Varnish & Chemicals
Overprint varnish (water-based, UV, oil-based), fountain solution, wash agents and press chemicals. Confirm which items are manufactured vs. traded, and whether the varnish lines carry food-contact-safe certification.
What the registry confirms, and what stays open.
In-house Colour Matching
Both the English website and the 1688 listing highlight a colour-matching centre (配色中心). This is a key capability for ink manufacturers — ask for a Delta-E tolerance guarantee and whether the centre is equipped with a spectrophotometer.
ISO 9001 Quality Management
ISO 9001 is stated on the company’s 1688 platform listing. The certificate has not been independently sighted by ChinaMakersHub — request a copy with the certification body name, scope and expiry date.
Established Since 2009
The company was registered on 2009-07-29 as a limited company. The English website describes a team with 20+ years of industry experience. Registry check confirmed active status as of 2026-09-30.
200+ Production Staff
The 1688 listing reports 51–100 administrative staff and 101–200 production personnel, with a factory area of 2,000 m² and 14+ main production machines. These figures are self-reported on the platform.
Low MOQ Available
Minimum order: 1 can for custom formulations, 100 cans for OEM (per 1688 listing). Monthly production capacity stated at RMB 5 million+. Confirm MOQ, lead time and payment terms for export orders.
Brand: Ceres
The company markets its products under the Ceres brand. The English website (enyyink.com) lists offset ink, flexo ink, security ink, fabric label ink, printing varnish and spare parts. The website is single-language (English only, no Chinese version) and does not include a blog or news section.
What was checked — and what the check found.
The stamp rests on a registration check: the credit code passes the national check-digit rule, the company has been active since July 2009 as a limited company, and the registry scope text and risk record were both successfully read (badge criteria met). ISO 9001 is stated on the company’s 1688 platform listing but has not been independently sighted. What stays open: the specific registered scope items and risk counts are recorded in the ChinaMakersHub registry snapshot but are not enumerated on this page; the factory in Shunde, Foshan has not been audited on-site (area, equipment count and headcount are self-reported on 1688); and the English website is single-language with limited product specifications. What would close it: a copy of the ISO 9001 certificate with scope and expiry, an on-site walkthrough of the Foshan factory, technical data sheets for each ink line, and food-contact or regulatory compliance certificates if packaging inks are the target use.
A 15-year Foshan ink manufacturer, read off the record.
Guangzhou Print Area Technology Co., Ltd. (广州市印域科技有限公司), trading as Ceres, was registered on 2009-07-29 in Guangzhou, Guangdong. The company manufactures and supplies printing inks, varnishes and chemicals from a factory in Shunde District, Foshan.
The product range includes offset printing ink, UV ink, flexographic ink, security ink, fabric label ink, printing varnish and press chemicals. The company operates an in-house colour-matching centre and reports 200+ production staff across a 2,000 m² facility with 14+ production machines (per 1688 listing). Monthly production capacity is stated at RMB 5 million+.
What overseas buyers should confirm first: a copy of the ISO 9001 certificate (stated on 1688 but not independently sighted), technical data sheets with viscosity, colour-strength and migration data, regulatory compliance for the target market (EN 71, REACH, FDA if food-contact), and an on-site factory visit to verify capacity and equipment. Contact routes through ChinaMakersHub; direct details are exchanged after first inquiry.
From registration to listing, on the record.
Company registered in Guangzhou
Registered on 2009-07-29 as 广州市印域科技有限公司, a limited company in Guangzhou, Guangdong. Factory operations based in Shunde District, Foshan.
15+ years of operation
Built the Ceres brand across offset, UV, flexo and security ink lines. English website (enyyink.com) launched; 1688 storefront active with 61% repeat-customer rate.
Listed on ChinaMakersHub
Registry read 2026-09-30: active, limited company, badge stamped. ISO 9001 stated on 1688 listing; 200+ production staff; colour-matching centre.
What would move it forward
ISO 9001 certificate copy, an on-site factory audit, technical data sheets with measured ink performance, and regulatory compliance certificates for food-contact or toy-safety applications.
Who this ink is for.
Commercial Printers
Offset, UV and flexo inks for sheet-fed and web presses. Ask for ink series compatibility with your press manufacturer, substrate range and colour-matching turnaround time.
Packaging Converters
Inks and varnishes for folding cartons, corrugated boxes and flexible packaging. Confirm food-contact compliance (if applicable), rub resistance and adhesion on coated and uncoated stocks.
Label & Narrow-Web Printers
Flexo and UV inks for pressure-sensitive labels, shrink sleeves and in-mould labels. Ask for low-migration formulations if the end product is food or pharmaceutical packaging.
Security Printing
Anti-counterfeit, thermochromic and fluorescent inks for documents, banknotes, tickets and brand-protection labels. Request sample prints showing the security feature under specified conditions (UV light, temperature change).
Sourcing guides for this category
The 27-Point China Factory Audit Checklist
Product Inspection in China Before Shipment: A Buyer's Guide
How to Request a Sample from a Chinese Factory (Without Getting Burned)
What Documents to Request From a Chinese Supplier Before Your First Order
More verified factories
Xing Hong Tai Electronics
Huize Tooling
Huisen Acrylic
Zhuoyue Home
Frequently Asked Questions
What does Print Area make?
Printing inks (offset, UV, flexo, security, fabric label), printing varnish, press chemicals and consumables, from a factory in Shunde, Foshan. The brand name is Ceres.
Is it a manufacturer?
The 1688 listing reports a 2,000 m² factory with 14+ production machines and 200+ production staff, and states ISO 9001 certification. The company has been registered since 2009 as a limited company. The factory has not been audited on-site by ChinaMakersHub.
Can it export directly?
The 1688 listing states international orders are supported. Export terms (Incoterms, payment, shipping) should be confirmed directly.
Which certificates does it hold?
ISO 9001 is stated on the 1688 platform listing but has not been independently sighted by ChinaMakersHub. For printing inks entering regulated markets, relevant certificates may include REACH compliance (EU), EN 71 (toys), FDA 21 CFR 175/176 (food-contact US), and Swiss Ordinance (food-contact CH). Request copies with scope and expiry dates.
What compliance points apply to printing ink?
Printing inks for food-contact packaging must comply with FDA 21 CFR 175/176 (US), Regulation (EC) 1935/2004 plus specific ink measures (EU), and the Swiss Ordinance on Materials and Articles in Contact with Food. REACH registration is required for substances above 1 tonne/year entering the EU. Low-migration inks are increasingly required for food and pharmaceutical packaging. Confirm with your compliance team which standards apply to your end use.
What did the ChinaMakersHub check find?
Run on 2026-09-30 against Chinese enterprise records: active since 2009-07-29, limited company, USCC 91440103691545260X (check digit passes), registered in Guangzhou. Registry scope text, risk record and active status were all confirmed (badge stamped). ISO 9001 stated on 1688 listing (not independently sighted). Factory in Shunde, Foshan: 2,000 m², 14+ machines, 200+ production staff (self-reported on 1688). English website (enyyink.com) is single-language with limited product specifications.
Talk to Print Area directly.
Send your ink specification (ink type, substrate, press type, colour targets, volume per order and target market). Ask for technical data sheets, a colour-match sample, the ISO 9001 certificate, lead time and export terms. ChinaMakersHub will route the request.