Huixuan Metal
Stainless steel lotion pumps, spray pumps and soap dispensers from Xinhui, Jiangmen. Registry-matched; pump parameters, capacity and MOQ to be confirmed.
One metal shop, three pump families.
Stainless Steel Lotion Pumps
The workhorse of the range: a metal-shell dispenser pump on a standard neck finish — 24/410 and 28/400 are the two a buyer will ask about first. What decides whether it sells is not the shell but four numbers: neck and thread tolerance, output per stroke, the material grade of the spring and ball, and the salt-spray hours the finish survives. At review none of the four was published, so this page states the format and leaves the numbers to be confirmed.
Spray Pumps and Mist Sprayers
The same metal shop turned to fragrance: crimp and screw spray pumps for perfume and home-fragrance bottles. Here the buyer judges atomisation — droplet size, spray pattern, output per actuation — because that is what the customer feels in the first second. Metal shells are the reason brands look at this supplier at all; the spray engine behind the shell is what they will test.
Soap Dispenser Pumps
Dispenser pumps for hand soap, sanitiser and hotel amenity lines: a heavier actuation, a longer dip tube, and a finish that has to survive daily wet use. This is the family where stainless steel earns its premium — plastic pumps discolour and crack in public washrooms, metal ones do not.
What the register and the platform profile confirm, and what to ask next.
One Metal Shop, Three Pump Families
Lotion pumps, spray pumps and dispenser pumps are the same capability seen three ways: metal shell forming, surface finishing, and assembly of a spring-and-ball pump engine. That is narrow, and narrow is what a buyer wants — a supplier who does one thing repeatedly is easier to qualify than a general hardware trader.
Registered 2019, RMB 300,000 of Capital
Registered on 13 August 2019 with RMB 300,000 of registered capital, fully paid, in Xinhui, Jiangmen. That is a small company by any measure, and it is stated here rather than left for a buyer to discover. What it means in practice: a 20,000-piece order is a serious order for this shop, and a 200,000-piece programme is not something to promise in the first email.
Eight Years on 1688 — Platform-Stated
The 1688 factory profile shows eight years on the platform, 367 product photographs, an A-grade taxpayer rating, and capability tags for export orders, build-to-drawing and build-to-sample work. These are the company's own claims on a platform it maintains, not a third-party audit — but eight years of continuous operation is itself evidence that the shop is real and stays in business.
No Company Website
At review there was no company domain and no English site. What a search returns is the 1688 profile, a handful of B2B directory listings, and corporate registry aggregator pages. A buyer searching for a 28/400 stainless pump cannot find this supplier at all, which is exactly the gap this profile is meant to close.
Pump Parameters Not Disclosed
Neck tolerance, output per stroke, material grade, salt-spray hours, leak and drop test results were asked for and not provided. Without them a buyer cannot tell whether the pump fits the bottle or survives a container, so they are left blank here instead of estimated. These four numbers are the whole technical data sheet, and they cost nothing to write down — the shop simply has never had to.
The Bath Line Is Declared, Not Promoted
The registered scope covers metal products and the 1688 profile also lists bath accessories — toilet brushes and bathroom sets. They are real products and they are not on this page as an export offer. A buyer looking for a pump supplier should not have to work out whether the factory is a pump maker or a general hardware shop.
What was checked — and which number a buyer still has to ask for.
The identity check is done and it is short, because there is not much to check. On 2026-10-23 the corporate record was read: the company is active, registered on 13 August 2019, capital of RMB 300,000 fully paid, scope covering metal products and plastic products. The credit code checks out and the registered address is in Xinhui, Jiangmen — the district that has been making bathroom hardware and sprayers for decades, which is why the pump capability is credible even without a plant tour. What the registry does not tell you, and what this page therefore does not claim: how many pumps come off the line in a day, what the neck tolerance and output per stroke are, which stainless grade is used, how many salt-spray hours the finish survives, and whether any export shipment has actually happened. A pump is a packaging component, so there is no CE-style certificate that closes the file. What closes it is a technical data sheet and a sample that fits the buyer’s bottle. Neither was available at review. ChinaMakersHub does not restate a supplier’s capability on its behalf — we tell you what to ask for.
A Xinhui metal shop, listed as it is.
Huixuan Metal trades as 江门市新会区绘轩金属制品有限公司, registered on 13 August 2019 with RMB 300,000 of registered capital, fully paid, at a warehouse unit on Sanhe Avenue South in Huicheng, Xinhui, Jiangmen. The registered scope is short and honest: manufacture and sale of metal products, sale of plastic products. No website exists.
The useful half of the picture comes from the 1688 factory profile rather than the registry. Eight years on the platform, 367 product photographs, an A-grade taxpayer rating, and tags for export orders, build-to-drawing and build-to-sample. The listed categories — nozzles and spray heads, other bathroom fittings, other toiletries — line up with what the company told ChinaMakersHub directly: the main product is the metal pump head. Two independent sources, same answer, which is more than most small shops can show.
What is deliberately missing is the number that matters most. A pump is bought on four figures — neck and thread tolerance, output per millilitre of stroke, stainless grade, salt-spray hours — and this shop has never had to write them down because domestic buyers ask for a photo and a price. The first export enquiry will ask for all four in the first email. Writing them down is the cheapest step available to this company, and it is the step this profile cannot take on its behalf.
Six years on the register, one narrow capability.
Registered in Xinhui
Registered on 13 August 2019 in Huicheng, Xinhui, Jiangmen, with RMB 300,000 of registered capital, fully paid. Scope: metal products and plastic products.
Eight years on 1688
The factory profile accumulates eight years of continuous operation, 367 product photographs, an A-grade taxpayer rating and tags for export orders and build-to-drawing work. Domestic trade is the channel; the platform is the shopfront.
Registry matched — listed
Onboards as CMH-F-HX5T9K. On 2026-10-23 ChinaMakersHub read the corporate record and the platform profile, and confirmed the main product with the company directly: metal pump heads. What still closes the file: the four pump parameters, capacity, MOQ and any export record.
Where these pumps end up on a bottle.
Fragrance and Home Fragrance Brands
Spray pumps where atomisation and shell finish carry the brand, in small runs a large pump factory will not schedule.
Skincare and Body Care Fillers
Lotion pumps for serum, lotion and cleanser lines, matched to standard neck finishes.
Hotel and Hospitality Amenity Suppliers
Dispenser pumps that survive daily wet use in public washrooms, where plastic discolours.
Contract Packagers
Buyers who fill for several brands and need one pump supplier across neck sizes.
Private Label and Small Batch Brands
Runs in the low thousands, where build-to-drawing and build-to-sample matter more than unit price.
Packaging Distributors
Distributors consolidating metal pumps, sprayers and closures from one source.
Sourcing guides for this category
The 27-Point China Factory Audit Checklist
Product Inspection in China Before Shipment: A Buyer's Guide
How to Request a Sample from a Chinese Factory (Without Getting Burned)
What Documents to Request From a Chinese Supplier Before Your First Order
More verified factories
Snow Medical Autoclaves
TOPAZCON Capacitors
WJM Silicone
Xiboman Gift Radios
Frequently Asked Questions
What does Huixuan Metal make?
Stainless steel dispenser pumps: lotion pumps on standard neck finishes such as 24/410 and 28/400, spray pumps and mist sprayers for fragrance, and soap dispenser pumps. The registered scope is metal products and plastic products, which matches the structure of a pump — a metal shell around a plastic and steel engine. The company also lists bath accessories on its 1688 profile; they are not offered on this page as an export line.
Is it a factory or a trading company?
The registered scope says manufacture and sale of metal products, and the 1688 profile is a factory profile with production capability tags. What was not established at review is which operations are in-house — shell forming, surface finishing, pump engine assembly — and how many machines there are. Ask for a video walk-through of the finishing and assembly areas before a first order.
What are the MOQ, sampling and lead times?
Not stated at review, so not published here. The platform profile does tag build-to-sample and build-to-drawing, which suggests small runs are accepted, but neither a number nor a lead time was confirmed. Confirm MOQ, sample cost, sample lead time and production lead time in writing before comparing quotes.
What pump parameters should I ask for?
Four: neck and thread tolerance (and which standard finishes you need), output per stroke in millilitres, the stainless grade of the shell and of the spring and ball, and the salt-spray hours the finish survives. Add leak and drop test results if the goods travel by sea. These four numbers are what a technical data sheet consists of, and none of them was available at review.
Does it hold any certificates?
No management-system or product certificate was sighted, and for this product category there is no CE-style mark that closes an order. What buyers actually ask for is documentation: a material grade statement, salt-spray and leak test reports, and — if the pump touches a cosmetic formula — compatibility information for the gasket and dip tube materials. Ask for those, not for a logo.
What did the ChinaMakersHub check find?
Read on 2026-10-23: the company is active, registered 13 August 2019 in Xinhui, Jiangmen, capital RMB 300,000 fully paid, scope covering metal and plastic products, credit code verified. The 1688 factory profile was also read: eight years, 367 photos, A-grade taxpayer, export and build-to-drawing tags — company-maintained, not third-party audited. Not established: pump parameters, capacity, MOQ, lead times and any export record.
Talk to Huixuan Metal directly.
Send the neck finish you need (24/410, 28/400 or your own), the bottle drawing, the output per stroke you want and the destination market — and ask, in the same message, for the stainless grade, the salt-spray hours, the leak test result, the MOQ in writing and a sample in your finish. ChinaMakersHub will route the registry record and the platform profile with your inquiry.