Jiulixing
Pull Handles
Stainless steel pull handles for entrance doors and shower enclosures from Danzao, Foshan — 88 catalogue models in AISI 201 and 304, 300 mm to 3 m, tube 8–45 mm. Registry-read active with hardware manufacture in scope and zero risk records; tube making, laser welding, polishing and laser marking in-house, plating and powder coating subcontracted. No salt-spray report, no SABER certificate, and the licence does not carry import and export — all stated on the page.
Tube, laser weld, polish, and the laser marker.
Entrance & Glass Door Pull Handles (54 models)
Catalogue models JLX-1001–1054: round-tube long handles, H- and T-profiles, square tube, back-to-back pairs, curved and C-shaped, plus decorative lines in gold, antique bronze, wood-grain inlay and engraved tube. Length runs 300 mm to 3 m and tube diameter 8–45 mm (factory-stated); the volume range is 500–800 mm back-to-back pairs.
Shower Door Pull Handles (34 models)
Catalogue models JLX-2001–2034 for frameless glass shower doors: crescent C-shapes, round-tube D handles, square and round back-to-back pairs and small single-side knobs, including matt black. Tell the factory the glass thickness and hole centres — these are the two numbers every shower-enclosure buyer asks about first.
Finishes
Matt black powder coat, polished, satin and plated, per the catalogue. Plating and powder coating are subcontracted (the company’s own intake sheet); tube making, cutting, welding, polishing and marking are in-house. A separate supplementary statement claims the whole chain including finishing is in-house — the two statements have not been reconciled, so ask which operations physically happen in this building.
Materials: 201 and 304
Both AISI 201 and AISI 304 are offered — 201 for dry indoor use, 304 where there is water or a project specification. The catalogue does not yet state the grade model by model, and no material certificate has been supplied. Ask for the grade in writing against the model number you are buying.
OEM Logo
Laser marking is in-house on a fully automatic marker, so customer logos can be applied to the handle. No private-label packaging specification has been published yet.
What Is Not On Record
No salt-spray (ISO 9227) report, no EN 1906 cycle testing, no SABER certificate for Saudi clearance, no published sampling or production lead time, and no export case studies. None of this is claimed anywhere on this page.
What the registry confirms, and what stays open.
Tube Making Through Laser Marking, In One Workshop
Equipment, as listed by the factory: 2 tube mills, 3 laser cutting lines, 2 large CNC punches, 1 automatic thread-punching machine, 7 automatic laser platform welders and 1 automatic foot-welding machine, 1 automatic polishing line with 2 bright-polish and 2 satin-polish machines, and 1 fully automatic laser marker, with 2 manual stations staffed by two makers with 20 years in the trade. Making its own tube is the part that matters commercially: the tube blank is not bought in, so diameter, wall and lead time are controlled in-house. CMH has not visited to check nameplates.
88 Models Against Two Different Buyers
The catalogue splits cleanly: 54 entrance models sell to door factories and architectural-hardware distributors, 34 shower models sell to glass and aluminium shops and shower-enclosure manufacturers. That is unusual for a shop of this size and is the reason a single supplier can cover both a villa door programme and a shower-enclosure line.
Capacity: Two Numbers on Record
The intake sheet states 100,000 pairs per month as normal output with room to double when orders allow; a later supplementary statement says over 150,000 pairs per month. CMH publishes the conservative number and flags the discrepancy rather than choosing the bigger one. Neither figure has been verified on site.
MOQ 30 Pieces — With a Caveat
The supplementary statement gives MOQ 30 pieces after sample approval; the original intake sheet answered “none”. It is also not yet settled whether 30 means pieces or pairs (handles are usually sold in back-to-back pairs). Confirm both the number and the unit before quoting a container.
The Licence Does Not Cover Export — Confirmed on the Registry
The registry read of 2026-09-19 gives the scope in its own words: 工程和技术研究和试验发展；五金产品制造；五金产品批发；五金产品研发；家具零配件生产；建筑用金属配件制造；建筑用金属配件销售 (technical research and development; manufacture, wholesale and development of hardware products; furniture component production; manufacture and sale of architectural metal fittings). Manufacture is in scope. Import and export is not, and there is no customs consignor registration; the company reports no self-managed exports, with past overseas shipments going through trading companies. For a buyer this decides who signs, who invoices and whose name is on the bill of lading: ask which entity is the exporter of record before the first order.
Registry Read: Active, Zero Risk Records, One Address Change
Read on 2026-09-19 from an official registry source: status 存续 (active), registered 13 April 2026, registered capital RMB 1 million with paid-in capital not published, insured headcount not published. Risk scan the same day: zero self-risk, peripheral-risk and historical-risk items — no administrative penalties, abnormal-operation listings, serious violations, dishonest-debtor or enforcement records. One advisory notice: a change of registered address. Two things a buyer should still ask about in person: the company is less than a year old as a legal entity, and neither the paid-in capital nor the headcount is on the public record.
No Test Reports Yet, and That Is the Gating Item
There is no salt-spray report, no EN 1906 test and no SABER certificate. Salt spray is the single document most often asked for on stainless handles, and Saudi clearance for HS 8302 requires a SABER product certificate. The factory has the product; what it does not yet have is the paperwork a specifier needs. Treat any 304 or corrosion claim as unproven until a report is issued.
What was checked — and what the check found.
No product certificate exists. What is verified is the registry: legal name, credit code, status, registration date, capital, address, scope and risk records were read on 2026-09-19 from an official registry source and are quoted as recorded, including the fact that the scope carries no import/export clause, that paid-in capital and headcount are not published, and that the plant building is registered in another company’s name. The equipment list, model count, size range, capacity and MOQ are the factory’s own statements and have not been verified on site; where the factory has given two different numbers, the conservative one is published and the discrepancy is noted. No test report, material certificate or product certificate exists yet, so none is referenced.
A workshop that makes one thing, read off the registry and a 2026 research report.
Jiulixing is Foshan Jiulixing Technology Co., Ltd. (佛山市久利兴科技有限公司), registered on 13 April 2026 in Danzao, Nanhai District, Foshan. An official registry read on 19 September 2026 returns active status, RMB 1 million of registered capital, a scope covering technical development, hardware manufacture and wholesale, furniture components and architectural metal fittings — and no import/export clause. The credit code 91440605MAKARDNG2U passes its check digit and 440605 is the division code for Nanhai, Foshan. The company is new but the team is not: it has been making hardware in Danzao, one of China’s stainless hardware clusters, since 2008.
The catalogue is 88 models of stainless steel pull handle and nothing else: 54 for entrance and glass doors, 34 for frameless shower enclosures, in AISI 201 and 304, 300 mm to 3 m, tube diameter 8–45 mm, finished matt black, polished, satin or plated. Tube making, laser cutting, laser welding, polishing and laser marking are in-house on the factory’s own equipment list; plating and powder coating are subcontracted, which the factory states itself.
Four things are open and published here rather than smoothed over. The licence carries no import/export clause and there is no customs registration, so the exporting entity is undecided. The legal entity is less than a year old, and neither its paid-in capital nor its insured headcount is on the public record. The plant building is registered in another company’s name, which is normal for a rented unit but worth asking about. And there is no salt-spray report, no EN 1906 test and no SABER certificate — for a stainless handle sold into wet areas or into Saudi Arabia, those documents are what a specifier asks for first.
A 2026 company on the registry, run by a Danzao hardware team since 2008.
The team starts in Danzao
The founding team has been making hardware in Danzao, Foshan since 2008 — the district is one of China’s stainless hardware clusters. This is the team’s own account, carried in the CMH research report.
Current company registered
佛山市久利兴科技有限公司 registered 13 April 2026 in Danzao, Nanhai, Foshan; scope covers hardware manufacture and architectural metal fittings, without an import/export clause.
CMH research report
A CMH research report dated 11 September 2026 audits the catalogue model by model (88 models), checks the registry, compares five named domestic competitors and pulls five years of HS 8302.41 customs data for 24 reporting countries.
Registry read · listed on CMH
Official registry read on 19 September 2026: active, RMB 1 million registered capital, manufacture in scope, import/export not in scope, zero risk records, one advisory notice for a change of registered address. Listed with the two capacity statements and the missing test documents disclosed.
Who buys pull handles, and what they ask first.
Shower Enclosure Manufacturers
The 34 shower models are the fastest fit: these buyers reorder by series and need the handle to match the hinges and clamps in finish. Send glass thickness and hole centres with the enquiry.
Glass & Aluminium Trade Shops
Shops that cut glass and sell fittings to installers buy handles by the box and care about matt black, satin and brushed finishes being consistent batch to batch.
Door Factories (OEM)
Entrance handles cut to the door programme’s length and hole pattern, usually on an annual frame with staged releases. Laser marking allows the door brand’s logo on the handle.
Architectural Hardware Distributors
Distributors want SKU breadth, mixed containers and private label — 88 models in one catalogue with in-house laser marking is the reason to talk.
Hotel & Commercial Fit-Out
Curved, C-shaped and extra-long entrance handles for lobbies and commercial entrances. Project buyers will ask for specifications and test reports first, which is the one thing not ready yet.
Project Hardware & Contractors (later)
Specification-driven buying with sample approval. Realistic only once salt-spray testing and, for Saudi Arabia, SABER certification are done — both are open.
Sourcing guides for this category
More verified factories
Gostoo Furniture
Yixinheng Acrylic
Huihexin Technology
Shenpuneng Electronics
Frequently Asked Questions
What does Jiulixing make?
Stainless steel pull handles, and only pull handles: 54 entrance and glass-door models (JLX-1001–1054) and 34 shower-door models (JLX-2001–2034), in AISI 201 and 304, from 300 mm to 3 m, tube diameter 8–45 mm.
Is this listing CMH-verified?
Yes, on the registry check. An official registry read on 19 September 2026 confirms the legal name, the credit code (check digit passes), active status, the registration date, RMB 1 million of registered capital and the scope in its own words, with zero risk records on the same day. It does not confirm the equipment list, the capacity, the MOQ or any product quality — there is no test report or certificate of any kind, and the scope does not include import and export.
Can they export directly?
Not today, and this is confirmed on the registry rather than assumed: the scope read on 2026-09-19 contains no import/export clause, and there is no customs consignor registration; past overseas shipments went through trading companies. Ask which legal entity will be the exporter of record, issue the invoice and appear on the bill of lading.
Is the steel 201 or 304?
Both are offered — 201 for dry indoor use, 304 for wet areas and project work — but the catalogue does not yet state the grade model by model and no material certificate has been supplied. Get the grade confirmed in writing against your model number, and ask for a mill certificate with the first shipment.
Do they have a salt-spray report or a SABER certificate?
No to both. Salt-spray testing to ISO 9227 has not been done, and there is no SABER product certificate, which Saudi Arabia requires for HS 8302 clearance. If you are importing into Saudi Arabia, agree at enquiry stage who initiates the SABER certificate and on which technical file.
What is the minimum order?
30 pieces after sample approval, per the factory’s later statement; its original intake sheet said there was no minimum. It is also not settled whether 30 counts pieces or back-to-back pairs. Confirm both before planning a container.
What should I send to get a quote?
Model number or a photo, length, tube diameter, hole centres, finish, material grade, glass thickness for shower handles, and quantity. Ask for the sample policy and lead time in the same message — neither is published.
Talk to Jiulixing Pull Handles directly.
Send the model number (JLX-1001–1054 entrance, JLX-2001–2034 shower), length, tube diameter, hole centres, glass thickness if it is a shower handle, finish and quantity. Ask for the per-model material declaration (201 or 304), the sample policy and the exporting entity — none of those three is settled on this page yet.