Sanjian
Fishing Tackle
Sea-fishing rods from a 28-year-old Guangzhou tackle name — jigging, popping and bottom-fishing lines. Registered 1998 with paid-in capital and fishing-tackle manufacturing in scope; zero social-insurance contributors, an office-tower registered address since 2022 and no import/export clause keep the checks open.
Sea rods, built to your spec sheet.
Bottom-Fishing Rods — Heavy & Light
The stated heavy and light bottom-fishing lines: boat rods for deep-water bottom work, blank power and guide train specified per order. For bottom rods the buyer file is the blank — ask for the carbon-tonnage mix, the test-curve rating and the dead-load test results for your target species at inquiry.
Speed Jigging & Electric Jigging Rods
The stated speed-jigging line plus a handheld electric jigging rod — the latter pairs the blank with a powered assist unit. For any rod carrying a motor or battery, ask for the electrical compliance file (EMC, and UN38.3 if lithium cells ship with it) before the order, not after.
Popping, Hairtail, Drifting & All-Round
The stated popping rods for surface work, deep-sea hairtail rods, drifting rods and an all-round line. Taper, length and lure-weight windows are specified per programme; sample first, then commit.
What the registry confirms, and what stays open.
Fishing-Tackle Manufacturing Is the Registered Trade
The corporate registry was read on 2026-09-03: the scope covers 渔具制造 (fishing-tackle manufacturing) and 渔具销售 — rods sit squarely inside it. The company was incorporated in March 1998: twenty-eight years on the register. See Credentials below.
Capital Paid In — After a Sharp Reduction
Registered capital is RMB 500,000, fully paid in. The same record shows the capital was cut from RMB 10 million to RMB 0.5 million in July 2024 — recorded, not hidden. For a buyer, paid-in capital is the floor; the reduction is the question to ask about.
A Zero-Person Insured Payroll
Registry data shows 0 social-insurance contributors against a stated headcount of 50–100, and the annual reports elect not to publish employee numbers. Long-established tackle names sometimes run production through partner workshops — legitimate, but it decides how capacity should be assessed. Ask where the rolling, wrapping and curing line actually sits today.
Registered at an Office Tower Since 2022
The registered address moved in March 2022 from an industrial-park workshop in Nancun to Suite 605 of an office tower on Panyu Avenue North. An office address is not a disqualifier — showrooms and export desks run from offices — but production premises are a separate fact. Ask for a walkthrough of the current workshop.
No Import/Export Clause in Scope
The registered scope contains no import/export clause, although the application ticked foreign-trade credentials. With stated target markets across the US, Europe, Australia and Southeast Asia, shipments would run under another entity’s title — ask which, and check that paperwork before relying on it.
Clean Risk Record Across 28 Years
No business-abnormality, administrative-penalty, serious-violation, judgement-debtor or lawsuit entries were found as of the read date, and annual reports have been filed continuously since 2013. The registry history is genuinely clean.
What was checked — and what the check found.
The registry read is done — and the findings are on this page, not behind it. On 2026-09-03 the corporate record was pulled from a Chinese enterprise-data provider: the company is active (存续), registered in March 1998 in Panyu, Guangzhou, and its registered scope covers fishing-tackle manufacturing — the registered trade for twenty-eight years, with capital fully paid in. Four findings keep the checks open, and all four are stated on this page: 0 social-insurance contributors against a stated headcount of 50–100; a registered address that has been an office-tower suite since 2022; no import/export clause in the registered scope, although the application ticked foreign-trade credentials; and a capital reduction from RMB 10 million to RMB 0.5 million in July 2024. No business-abnormality, administrative-penalty, serious-violation, judgement-debtor or lawsuit records were found as of the read date. This page does not carry the CMH Verified stamp. What would move the file forward: the export-route explanation, a walkthrough of the current production line, and an honest picture of who runs it.
A 28-year tackle name, listed as it is.
Sanjian Fishing Tackle is the working name of Guangzhou Sanjian Sport Equipment Co., Ltd. (广州市三剑体育器材有限公司), a fishing-tackle company registered in March 1998 in Panyu, Guangzhou — registration read against the corporate registry in September 2026. The application lists eight sea-fishing rod lines, from heavy bottom-fishing rods to a handheld electric jigging rod, and a headcount of 50 to 100; the registry shows zero social-insurance contributors. This profile is built from the onboarding application plus the registry record, and it is listed with checks open.
The twenty-eight-year registration is real, and so is the manufacturing clause — fishing-tackle manufacturing has been on the licence throughout, and annual reports have been filed every year since 2013. What has changed is the footprint: the registered address moved from an industrial-park workshop to an office tower in 2022, and registered capital was cut from RMB 10 million to RMB 0.5 million in 2024. Together those read like a brand that now runs production through partners — a workable model, and one a buyer should see stated plainly rather than discovered later.
What the registry check found is stated plainly. Manufacturing is genuinely in scope and capital is paid in. The gaps are stated too: no import/export clause, so the stated US, European, Australian and Southeast Asian orders would ship under another entity’s title; and the insured payroll stands at zero against a stated 50–100, which makes ‘where is the line, and who runs it’ the right first-inquiry question. Commercial terms — MOQ 1 piece, sampling 3 days, production 15 days — are the company’s own figures. Contact routes through ChinaMakersHub; direct details are exchanged after first inquiry.
Twenty-eight years, on the record.
Registered in Panyu, Guangzhou
The company is incorporated in March 1998 with sporting goods and fishing tackle in its scope — one of the earlier private tackle registrations of the Pearl River Delta tackle belt. Confirmed on the corporate registry.
Adds the manufacturing clause
A scope update in June 2016 writes 渔具制造 (fishing-tackle manufacturing) onto the licence alongside wholesale and retail, and the address moves to an industrial-park workshop in Nancun, Panyu.
Capital raised to RMB 10M
Registered capital increases from RMB 0.5 million to RMB 10 million in October 2017 — the expansion-era filing.
Address moves to an office tower
In March 2022 the registered address leaves the Nancun industrial-park workshop for Suite 605 of an office tower on Panyu Avenue North — the production-premises question dates from here.
Capital reduced to RMB 0.5M
Registered capital is cut back from RMB 10 million to RMB 0.5 million in July 2024. Recorded on the registry and stated on this page.
Registry read — checks open
On 2026-09-03 ChinaMakersHub read the corporate record: status active, twenty-eight years on the register, fishing-tackle manufacturing in scope, capital paid in, a clean risk record — and the findings that keep the checks open: 0 social-insurance contributors against a stated 50–100, the office-tower registered address, no import/export clause despite the ticked foreign-trade credentials, and the 2024 capital reduction. What would move the file forward: the export-route explanation and a walkthrough of the current production line.
Where these rods go to work.
Tackle Brands & Labels
Sea-fishing rod programmes to spec — blank power, taper, guide train and finish per brand sheet; sample before commitment.
Jigging & Popping Specialists
The stated speed-jigging and popping lines target the technique-specific shelf — lure-weight windows and test curves per order.
Electric-Assist Programs
The handheld electric jigging rod pairs blank and powered unit — ask for the EMC / battery compliance file with the quote.
Importers & Distributors
Eight stated rod lines cover a sea-fishing planogram from bottom work to surface popping.
Trial Orders
A stated MOQ of 1 piece makes a sample-led first order easy to structure — with the premises and export questions asked first.
Charter & Lodge Supply
Heavy bottom and drifting rods for fleet and lodge buyers — confirm production continuity against the payroll finding.
Sourcing guides for this category
Importing from China: The Compliance Checklist by Market
What Documents to Request From a Chinese Supplier Before Your First Order
How to Write a Product Spec Sheet for a Chinese Factory
Product Inspection in China Before Shipment: A Buyer's Guide
More verified factories
Gostoo Furniture
Yixinheng Acrylic
Huihexin Technology
Shenpuneng Electronics
Frequently Asked Questions
What does Sanjian Fishing Tackle make?
Eight stated sea-fishing rod lines: heavy and light bottom-fishing rods, speed jigging rods, a handheld electric jigging rod, popping rods, deep-sea hairtail rods, drifting rods and an all-round line. Blank power, taper, guides and finish are specified per order; details are shared at inquiry.
Is Sanjian a factory or a trading company?
On the registry, a manufacturer by scope — 渔具制造 (fishing-tackle manufacturing) has been on the licence since 2016 and the company dates to 1998. The honest caveats are on the page: the registered address has been an office-tower suite since 2022, and the registry shows 0 social-insurance contributors against a stated 50–100. That combination often means production runs through partner workshops — ask for a walkthrough of the current line and judge from that.
Can it export in its own name?
Not on the current registration. The registered scope contains no import/export clause, although the application ticked foreign-trade credentials. The stated US, European, Australian and Southeast Asian markets mean orders would ship under another entity’s title; ask which, and check that paperwork before relying on it.
What certifications does it hold?
The application ticked ISO 9001, ISO 14001, SGS, CE and REACH — none sighted at listing, so all are marked as claimed, not verified. For rods themselves there is no hard certification gate; for the handheld electric jigging rod, ask for the EMC file and, if lithium cells ship with it, UN38.3.
What are the MOQ, sampling and production lead times?
The company’s stated terms: MOQ 1 piece; sampling 3 days; production 15 days. These are the company’s own figures — confirm current pricing and lead time through ChinaMakersHub when you send your spec sheet.
What did the ChinaMakersHub registry check find?
Run on 2026-09-03 against Chinese corporate-registry data: the company is active (存续), registered in March 1998 in Panyu, Guangzhou, and the 18-digit credit code passes the national check-digit rule with a 440113 division prefix matching Panyu. The registered scope covers fishing-tackle manufacturing and capital is paid in. Four findings are flagged, not hidden: 0 social-insurance contributors against a stated 50–100; an office-tower registered address since March 2022; no import/export clause despite ticked foreign-trade credentials; and a capital reduction from RMB 10M to RMB 0.5M in July 2024. No business-abnormality, administrative-penalty, serious-violation, judgement-debtor or lawsuit records were found as of the read date. This page is listed with checks open and does not carry the CMH Verified stamp.
Why is this factory listed if the checks are open?
Because two things are true at once. The company is genuinely twenty-eight years old with fishing-tackle manufacturing on its licence, paid-in capital and a spotless risk record — a real tackle name, not a shelf company. And its current footprint is unclear in ways a buyer should see before, not after, the deposit — so the file is on the page. A sample-led first order with these questions asked first is the rational way to engage; the listing can be upgraded when the answers arrive and hold up.
Talk to Sanjian Fishing Tackle directly.
Send your spec sheet with blank power, taper, guides, quantity and destination — and the team will come back with a sample plan and a quote. Ask about the production line and the export paperwork route in the same message; ChinaMakersHub will route the request.