AOLI
Faucets
Basin, kitchen, shower and bathtub faucets from Shuikou town, Kaiping, Jiangmen — one of China’s largest faucet production clusters. Registered since 2006, registry-matched September 2026: active status, manufacturing in scope. Vertically integrated with in-house pressure casting and electroplating subsidiaries.
Five faucet lines, from basin to kitchen.
Basin Faucets (Panel Series)
Basin mixer faucets for bathroom vanities and washbasins. The company lists these as its first product line, with model codes in the AB, VG and ED series. Finish, spout height, handle type and valve cartridge are specified per order — state the basin type (above-counter, under-counter, wall-mounted) and the hole configuration with your enquiry.
Kitchen Faucets
Kitchen mixer faucets, listed on the company’s English website as a dedicated product line. Pull-out, pull-down and fixed-spout types are common in the Shuikou cluster; state the sink configuration (single-hole, three-hole) and the spout reach you need.
Shower Systems (Shower Series)
Shower mixer sets including shower heads, hand showers and diverter valves. State the pipe centre distance, valve type (thermostatic or pressure-balance) and the finish with your enquiry.
Bathtub Faucets
Bathtub mixer faucets, deck-mounted or wall-mounted. State the mounting type, spout reach and whether a hand shower is required.
Cold-Water-Only Faucets (Single Cold Series)
Single cold-water faucets for utility and commercial use. A simpler valve assembly; state the application (laundry, outdoor, utility sink) and the thread standard.
What the registry confirms, and what stays open.
Registered Faucet and Sanitary-Ware Manufacturer
The corporate registry was read on 2026-09-30: active status (存续), registered in Shuikou town, Kaiping, Jiangmen — one of China’s best-known faucet production clusters. The company was registered in April 2006 as a sanitary-ware manufacturer. See Credentials below.
Vertically Integrated: Casting and Electroplating In-House
The company’s English website lists four entities under one group: Kaiping Yibiao Sanitary Ware (the registered entity), Kaiping Shanghua Sanitary Ware, a pressure-casting factory and an electroplating factory. Vertical integration from raw casting through plating to finished faucet is a common and practical arrangement in the Shuikou cluster — it reduces lead time and keeps quality control in-house. Ask for a video walkthrough of the casting, plating and assembly lines.
Twenty Years of Registration
Registered on 3 April 2006, giving the entity twenty years of continuous registration. The company’s website states an origin date of 1995 — common when the business predates the current company registration as an earlier workshop or partnership. Ask for shipped-order references by destination if trading history matters to your decision.
Own Brand and English Website
The AOLI brand (意标/奥利) has a dedicated English website at aoli-faucet.com with product photography, model codes and a VR showroom. An English-language web presence with structured product pages is less common among small faucet works in Shuikou — it signals active export intent.
Shuikou Cluster Location
Shuikou town in Kaiping, Jiangmen is one of China’s largest faucet and sanitary-hardware clusters, with hundreds of faucet makers, brass foundries and plating lines within a few kilometres. That matters for material supply, tooling and subcontracting turnaround — it says nothing about any individual company’s quality, which is why the credentials section stays narrow.
What was checked — and what the check found.
The registry read is done. On 2026-09-30 the corporate record was pulled from a Chinese enterprise-data provider: the company is active (存续), registered on 3 April 2006 in Shuikou town, Kaiping, Jiangmen, and its registered scope covers sanitary-ware manufacturing. The AOLI brand has a dedicated English website at aoli-faucet.com with product photography, model codes and a VR showroom. The website also lists four entities under one group — Yibiao Sanitary Ware, Shanghua Sanitary Ware, a pressure-casting factory and an electroplating factory — suggesting vertical integration from raw casting to finished product. No product catalogue, test report, ISO certificate or third-party audit report has been supplied for this listing. When certifications and evidence are provided, the credentials section is updated. On any document you are shown later, check three things on the paper itself: the issuing body, the holder name, and the validity date. ChinaMakersHub does not restate a supplier’s certificate validity on its behalf — we tell you what to ask for.
A Shuikou faucet maker, read off its registry record.
AOLI Faucets is the export brand of Kaiping Yibiao Sanitary Ware Industrial Co., Ltd. (开平市意标卫浴实业有限公司), a faucet and sanitary-ware manufacturer registered on 3 April 2006 in Shuikou town, Kaiping, Jiangmen, Guangdong — registration confirmed against the corporate registry in September 2026. The company’s English website at aoli-faucet.com lists five product lines — basin, kitchen, shower, bathtub and cold-water faucets — with model codes across the AB, VG, ED and BX series, and features a VR showroom.
Shuikou town sits at the centre of Kaiping’s faucet belt, one of China’s largest clusters of faucet, valve and sanitary-hardware manufacturers. A buyer searching Chinese B2B listings for 开平 水龙头 will find a long column of faucet works in the same few towns. The company’s website lists four entities under one group — Kaiping Yibiao Sanitary Ware, Kaiping Shanghua Sanitary Ware, a pressure-casting factory and an electroplating factory — indicating vertical integration from raw brass casting through plating to assembled faucet.
What the registry check found is stated plainly. The read on 2026-09-30 confirms an active company whose registered scope covers sanitary-ware manufacturing — the Verified stamp in the hero is earned on that basis. The company’s website states an origin date of 1995, predating the 2006 registration, which is common in Shuikou where many faucet works began as family workshops before incorporating. No product catalogue, ISO certificate, test report or third-party audit report has been supplied for this listing — the product information comes from the company’s own website. When certifications and evidence are provided, the credentials section and the product detail are updated.
Registered in 2006, in China’s faucet capital.
Business origin (stated)
The company’s website states an establishment date of 1995, predating the current corporate registration — typical of Shuikou workshops that later incorporated as companies.
Company registered
Registered 2006-04-03 in Kaiping, Jiangmen as 开平市意标卫浴实业有限公司, a sanitary-ware manufacturer. Confirmed on the corporate registry.
Registry matched — CMH Verified
On 2026-09-30 ChinaMakersHub read the corporate record: status active (存续), manufacturing in the registered scope, credit code verified. The AOLI brand has a working English website with five product lines and a VR showroom.
Joins CMH
Listed as CMH-F-AEAB54 with the registry read on file; MOQ, sampling, lead time, certification documents and export arrangement remain open checks.
Where these faucets go to work.
Bathroom Renovation & Fit-Out
Basin and shower faucets for residential and hotel bathroom projects — finish and valve type matched to the designer’s specification.
Kitchen OEM & Private Label
Kitchen faucets sourced under the buyer’s brand — spout style, finish and packaging to specification; in-house casting and plating keep the supply chain short.
Wholesale & Distribution
Standard faucet lines for import-wholesale programmes — the Shuikou cluster location supports short restocking cycles.
Hospitality & Commercial Projects
Bathtub and shower sets for hotel and serviced-apartment programmes requiring consistent specification across hundreds of rooms.
Plumbing Contractors
Basin, kitchen and utility faucets specified into new-build and refurbishment plumbing packages.
Sourcing guides for this category
The 27-Point China Factory Audit Checklist
Product Inspection in China Before Shipment: A Buyer's Guide
How to Request a Sample from a Chinese Factory (Without Getting Burned)
What Documents to Request From a Chinese Supplier Before Your First Order
More verified factories
Manlide Equipment
Longrun Printing Machinery
Jindong Packaging
Guangci Nutraceuticals
Frequently Asked Questions
What does AOLI / Yibiao make?
Five product lines, per the company's English website: basin faucets, bathtub faucets, shower systems, kitchen faucets and cold-water-only faucets. Model codes include the AB, VG, ED and BX series. Finish, valve, spout and mounting are specified per order.
Is this a factory or a trading company?
On the registry, a manufacturer. The corporate-registry read on 2026-09-30 confirms the registered scope covers sanitary-ware manufacturing. The company's website lists four entities including a pressure-casting factory and an electroplating factory, indicating vertical integration from casting to finished product. The company is located in Shuikou town, Kaiping, one of China's largest faucet manufacturing clusters.
How long has the company been in business?
The company registration dates from 3 April 2006, giving it twenty years of continuous registration. The website states an origin in 1995, which may refer to an earlier workshop or partnership before the current company was incorporated. Ask for shipped-order references if trading history matters to your decision.
What certifications does it hold?
No certifications have been sighted or supplied for this listing. On any certificate you are shown later, check three things on the paper itself: the issuing body, the holder name, and the validity date. For drinking-water-contact markets, ask for material and compliance test reports from a named laboratory.
What did the ChinaMakersHub registry check find?
Run on 2026-09-30 against Chinese corporate-registry data: the company is active (存续), registered on 3 April 2006 in Shuikou town, Kaiping, Jiangmen, Guangdong, with RMB 2.4003 million registered capital. The registered scope covers sanitary-ware manufacturing, and the 18-digit credit code passes the national check-digit rule with a 440700 division prefix matching Jiangmen. The company has a working English website at aoli-faucet.com with five product lines and a VR showroom.
Talk to AOLI Faucets directly.
Send the faucet type (basin, kitchen, shower or bathtub), the finish, valve type, mounting style, and your target market. Ask about MOQ, sampling, lead time, and whether OEM/ODM is available. ChinaMakersHub will route the request.