Bai'an Belt Splicing Equipment
Water-cooled and air-cooled heat presses for PVC, PU and PE light conveyor belts, from 300 mm to 4 m, plus finger punchers and slitters — a 2013 Guangzhou maker with six patents in its own former name and a clean record.
Presses that close the loop, built in Zengcheng.
Water-Cooled Belt Splicing Presses
Heat presses that melt and join the ends of PVC, PU and PE light conveyor belts, then cool the joint by water circulation. The catalogue lists the BN-S series from 400 mm to 4,000 mm effective length, 180 mm heating width, up to 7 bar and 210 °C, 220 V (380 V optional on longer models). A cycle takes about 30–45 minutes.
Air-Cooled Belt Splicing Presses
Lighter one-piece presses for on-site splicing without a water supply. The BN-F series runs from 300 mm to 3,000 mm, 150–180 mm heating width, 2–4 bar, 200 °C, with flight-case packing listed for the shorter models.
Finger Punchers
Mechanical (portable) and automatic punchers that cut the finger pattern into belt ends before splicing, for rubber, PVC and PU belts. Ask for the finger profiles and die sizes available.
Timing, Flat & Easy-Clean Belt Splicers
Smaller presses for PU timing belts, flat transmission belts, easy-clean (homogeneous) food belts and short-diameter belts, with customisable splicing templates.
Slitters, Guide Welders & Measuring Machines
Width slitters, semi-automatic cutting tables, V-guide welders (K6/K10/K15) and a belt length measuring machine (±1 mm within 5 m) for belt fabrication shops.
What the registry confirms, and what stays open.
An Equipment Manufacturer by Scope
The registered scope covers general equipment manufacturing (excluding special equipment), plastics-processing machinery manufacturing, general parts manufacturing, mechanical parts processing, and rubber and plastic products manufacturing.
Patents in Its Own Former Name
The catalogue shows four utility-model patents (belt splicer structure, handheld heat press, double-edge sealer, mechanical finger puncher) and two design patents (width slitter, easy-clean belt splicer), granted 2025. The patentee is Guangzhou Bai’an Machinery Accessories Co., Ltd. — the company’s registered former name.
Export Route in Place
Goods import/export and technology import/export are both in the registered scope. The catalogue’s sales map marks Southeast and South Asia, Central Asia, the Middle East, Africa and Brazil.
A Clean Record
No court, penalty, abnormal-operation or dishonesty items on the enterprise record. Five change notices (shareholder, officers, capital, name, address) are routine company changes.
A Small Team
Eight staff are insured and registered capital is RMB 1 million, fully paid. Buyers should confirm workshop size and monthly output per model.
Certificates Not Sighted
No CE declaration, test report or ISO certificate is in the catalogue. For the EU, a splicing press is machinery with electrical heating: ask for the CE Declaration of Conformity and the standards it cites.
What was checked — and what the check found.
The CMH Verified stamp rests on a registration check: the credit code passes the national check-digit rule, the company has been active since 2013 with equipment manufacturing and import/export in its scope, and the record shows no court, penalty or dishonesty items. The six patent certificates in the catalogue name the company’s former registered name as patentee. What stays open: no CE, test report or ISO certificate sighted; the “high-tech enterprise” line in the catalogue is not matched by the record, which tags it a technology-based SME; workshop and output not yet seen. What would close it: a CE Declaration of Conformity per model, a factory video, and patent register extracts.
A belt-splicing specialist, read off the record.
Guangzhou Bai'an Intelligent Equipment Co., Ltd. (广州市柏岸智能设备有限公司), formerly Guangzhou Bai’an Machinery Accessories Co., Ltd., was registered in September 2013 and sits in Xintang, Zengcheng, Guangzhou. It makes the presses that join the two ends of a light conveyor belt into an endless loop — the tool a belt fabricator or a plant maintenance crew uses on site.
The catalogue groups the range into three families: heat presses (water-cooled and air-cooled), finger punchers, and slitting and cutting equipment, plus smaller splicers for timing belts, flat belts and easy-clean food belts. It names users in textiles, food, printing, logistics, tobacco, electronics and ceramics, and says the products have reached more than ten countries or regions. The brand shown on the machines is Shanneng (善能).
Registered capital is RMB 1 million, fully paid, with 8 insured staff. The record carries no court or penalty items. No CE or ISO document has been provided yet.
Twelve years on one tool, on the record.
Company registered
Registered in September 2013 as Guangzhou Bai’an Machinery Accessories Co., Ltd., later renamed Guangzhou Bai’an Intelligent Equipment Co., Ltd. Confirmed on the enterprise record.
Six patents granted
Four utility-model and two design patents on belt splicing and belt cutting equipment, granted February–May 2025 in the company’s former name (catalogue certificates).
Listed on ChinaMakersHub
Registry read 2026-09-30: active, equipment manufacturing and import/export in scope, 8 insured staff, no court or penalty items.
What would strengthen the listing
CE Declaration of Conformity per model, a factory and splicing demo video, and output per month by model.
Who these presses are for.
Belt Fabricators & Distributors
Shops that cut, finger and join PVC/PU belts to length for local customers need a press, a puncher and a slitter. Confirm heating widths match the belt widths you stock.
Food Processing Plants
Maintenance teams re-splicing PU and easy-clean belts on site. Ask which models fit homogeneous food belts and the joint profile they produce.
Logistics & Airport Baggage Handling
Long PVC belts on sorters and conveyors; the catalogue lists presses up to 4 m for wide belts.
Textile, Printing & Tobacco Lines
Timing belts and flat transmission belts joined with dedicated splicers and templates.
Equipment Importers
Distributors adding a splicing-press line under their own name. Ask about OEM labelling, voltage options (220/380 V) and spare heating plates.
Sourcing guides for this category
What Documents to Request From a Chinese Supplier Before Your First Order
The 27-Point China Factory Audit Checklist
Importing from China: The Compliance Checklist by Market
How to Write a Product Spec Sheet for a Chinese Factory
More verified factories
Weiyile Set-Top Boxes
Aosibo Adhesives
Jinhuawang Rescue Equipment
Cangzhou Jingyu Enclosures
Frequently Asked Questions
What does Bai’an make?
Heat presses for splicing light conveyor belts (water-cooled BN-S series, 400 mm–4 m; air-cooled BN-F series, 300 mm–3 m), mechanical and automatic finger punchers, timing-belt and flat-belt splicers, width slitters, guide welders and a belt measuring machine.
Is it a manufacturer?
Yes. General equipment manufacturing, plastics-processing machinery manufacturing and mechanical parts processing are in the registered scope, and six patents on this equipment are granted in the company’s own former name.
Can it export directly?
Yes. Goods and technology import/export are in the registered scope. The catalogue map marks buyers in Southeast and South Asia, Central Asia, the Middle East, Africa and Brazil.
Does a belt splicing press need CE for Europe?
A heat press with electrical heating and pneumatic or hydraulic pressing is generally machinery under the EU Machinery Directive 2006/42/EC (Machinery Regulation (EU) 2023/1230 from January 2027) and also falls under low-voltage and EMC rules, so the maker issues a Declaration of Conformity. None has been sighted yet; ask for it with the harmonised standards listed.
Are there any risk items?
None on the court, penalty, abnormal-operation or dishonesty records. Five change notices (shareholder, officers, capital, name and address) appear, which are routine company changes.
What did the ChinaMakersHub check find?
Run on 2026-09-30 against Chinese enterprise records: active since September 2013; USCC 91440112076536434R check digit passes; RMB 1 million registered and paid; 8 insured staff; equipment manufacturing and import/export in scope; former name matches the patentee on six patent certificates; Zengcheng, Guangzhou address.
Talk to Bai'an Belt Splicing Equipment directly.
Send belt material, width, thickness and joint type (finger or overlap), plus voltage and whether water is available on site. Ask for the CE Declaration of Conformity and a splicing demo video. ChinaMakersHub will route the request.