Your first sunscreen sample from a Guangzhou plant arrives in seven days, as quoted. It is a pleasant white lotion. It is also useless to you, because it was built on a filter system that is not permitted in the market you are launching in, it is heavier than the fluid texture your customers expect, and it was poured into a 50 ml tube when your listing is a 100 ml pump. None of that is the formulator's fault. The brief said "SPF 50 face sunscreen, lightweight, for the US" and the formulator filled in the rest from the house default. A sunscreen development brief for a Chinese OEM has to do more work than that, because sun care is the one skincare category where the regulatory route, the filter chemistry and the sensory target all constrain each other — change one and the other two move.
Below are the eleven items that make a first sample usable rather than merely fast, in the order a formulator needs them. The sample is the cheap part; the wasted week is what costs you the launch window.
Why sunscreen briefs fail when skincare briefs succeed
For a moisturiser, a thin brief is survivable. The formulator picks a house base, the sample is close enough, and revision two lands it. Sunscreen is different in three ways that a buyer coming from general skincare tends to underestimate:
- The filter system is fixed by the destination, not by preference. Each market publishes its own list of permitted UV filters and maximum concentrations, and the lists differ. A filter that is standard in a European or Southeast Asian formulation may not be usable in a US product at all. If the brief does not name the market, the formulator picks the filters that the plant runs most often — and you find out at the compliance review.
- The route decides what the product legally is. Sun protection follows the cosmetic route in some markets and a drug route in others. In the United States, sunscreen is regulated as an over-the-counter drug rather than as a cosmetic, which is a separate pathway with its own labelling, testing and establishment obligations that fall on the brand owner. That pathway is your responsibility, not the plant's; no Chinese contract manufacturer supplies it, and any supplier implying otherwise is a reason to look elsewhere.
- Filter load drives texture. The higher the protection target, the more filter mass the emulsion carries, and the harder it is to keep a light, non-greasy, non-whitening finish. A brief that asks for a high protection factor, a mineral-only system and a weightless feel has given the formulator three constraints that pull against each other. That is not impossible, but the formulator needs to know which one bends.
The listing for Yadun Cosmetics, a Guangzhou plant running sunscreen and base makeup among eight lines, carries the plant's own caution on this point: buyers exporting sun protection should confirm the destination market's regulatory route early, because requirements differ significantly between regions. It quotes about three days for a sample on a standard formulation and about seven for custom development, with production 15–30 days after sample approval. Those timings only pay off if the brief is complete on day zero.
The eleven items
1. Destination markets, in priority order
Name every market you will sell in during the first eighteen months, and rank them. The formulator will design to the most restrictive filter list among them, or tell you that one formula cannot serve all of them and you need two. A brief that says "global" gets a formula that is legal nowhere in particular.
2. Regulatory route per market, and who owns it
State, for each market, whether the product will go as a cosmetic or through a drug-type route, and confirm in the brief that regulatory filing, testing and labelling compliance are yours. This is not politeness; it removes the ambiguity that leads plants to say "yes, it can be exported" when the real answer is "yes, if you do the filing." For the US route in particular, plan your own path with a regulatory consultant before the sample stage, not after.
3. Target protection label and the test method behind it
Write the protection factor you intend to put on the label, the UVA or broad-spectrum claim you intend to make, and the test method your market requires for each — the internationally harmonised in-vivo method for most cosmetic-route markets, the US federal method for the US route. State that the label values will be substantiated by third-party testing commissioned in your brand's name. The formulator designs to a target; the test decides whether the target is met. Nothing on the plant's side substitutes for that report, and how the report is owned and transferred is a separate negotiation — see the sibling article on SPF and UVA test-report ownership.
4. Water-resistance intention
If you intend to claim water resistance at all, say so, and say for how long, in the terms your market uses. It changes the film-former and emulsifier choice, and it adds a second test to your budget. A formula developed without that intention will rarely pass the test when you decide later that you want the claim.
5. Filter-system preference and exclusions
Mineral only, organic only, or hybrid. Then list any filters or ingredient classes you exclude for marketing reasons — reef-related exclusions are the common example — and any you require. Also ask the plant, in the brief, to return the full filter list with concentrations alongside the sample so your regulatory reviewer can check each against the destination list. Whether this plant will formulate to a named market's permitted-filter list on request is not published; put the question in writing and get the answer before development starts.
6. Format and dosage form
Lotion, cream, fluid, gel, stick, or spray. This is a manufacturing-capability question as much as a formulation one. Sticks need pouring equipment; pressurised sprays need aerosol filling and a different licence unit; alcohol-based fluids raise transport-classification questions. The plant's listing names sunscreen lotions, creams and primers; whether it runs stick or aerosol lines is not published, so if your format is either of those, confirm capability before you brief. The sibling article on sunscreen emulsion formats lays out the trade-offs by format.
7. Sensory and finish targets, with a benchmark
Describe the finish in words a formulator can act on — white cast acceptable or not, matte or dewy, tinted or untinted, pilling under makeup acceptable or not — and then send a physical benchmark sample of a market product whose feel you want to approach. This is the single most effective item in the brief. A tube of benchmark product in the courier bag replaces three rounds of "lighter, please."
8. Skin and use context
Face, body, or both; adult only; intended for use under makeup or alone; any skin-type positioning your marketing will lean on. Keep this descriptive, not clinical. A brief that says "for sensitive skin" is a marketing positioning you will need to substantiate yourself; the formulator reads it as "low fragrance, narrow preservative palette, no known common sensitisers" and formulates accordingly.
9. Free-from list, fragrance and preservation
List every ingredient class the label will exclude. Say whether the product is fragranced, and if so whether you will supply the fragrance or the plant should propose one. Say whether you have a preservative preference or restriction. Every exclusion narrows the formulator's options and can change the texture; list them up front so the first sample already respects them.
10. Pack: primary component, net content and fill
Tube, bottle, pump, airless, stick, or spray, with the net content in millilitres and grams. Say whether you will supply components or whether the plant sources them. Sunscreen is viscosity-sensitive: a formula built for a tube may not pump cleanly from a lotion pump, and an airless pack needs a formula that does not separate under suction. The pack is a formulation input, not a decision to defer.
11. Commercial frame: quantity, price target, timeline, sample terms
State the pilot quantity (the plant publishes a 2,000-unit minimum), the target ex-works unit price band, the launch date working back through 15–30 days production and your testing lead time, and the sample terms you are requesting: how many samples, in what quantity each (your test lab will need a stated minimum mass per test — ask them before you ask the plant), whether sample fees apply and whether they are credited against the production order, and how many revision rounds are included before a development fee starts. None of those sample terms is published for this plant; that is exactly why they belong in the brief as explicit questions.
The brief on one page
| # | Item | Why it changes the formula | What the formulator does without it |
|---|---|---|---|
| 1 | Markets, ranked | Sets the permitted-filter list | Uses house-default filters |
| 2 | Route and ownership | Clarifies what "export-ready" means | Assumes cosmetic route |
| 3 | Protection target + method | Sets filter load and test plan | Targets the house standard |
| 4 | Water resistance | Film-former and emulsifier choice | Omits film-former |
| 5 | Filter preference / exclusions | Constrains the filter set | Picks the cheapest that meets target |
| 6 | Format | Confirms line capability | Defaults to lotion |
| 7 | Sensory + benchmark | Defines finish and feel | Guesses |
| 8 | Skin / use context | Narrows fragrance and preservatives | Adult face default |
| 9 | Free-from list | Removes ingredient classes | Uses full palette |
| 10 | Pack and net content | Viscosity and stability targets | Fills whatever is on hand |
| 11 | Quantity, price, timeline, sample terms | Sets cost ceiling and revision budget | Quotes house terms after the fact |
Send it as a document, not as a chat thread. The general discipline in writing a product spec sheet for a Chinese factory applies; sunscreen adds items 1 to 5 as non-negotiable fields.
Three things experienced sun-care buyers put in the brief that first-timers leave out
The test-lab sample mass. A formulator will happily send a 30 g sample. An in-vivo protection test typically needs far more than that across the test panel, and a water-resistance test needs its own allocation. Ask your lab for the required quantity first, then specify it in the brief so the sample batch is large enough. Otherwise you approve a 30 g sample and then wait for a second batch before testing can start — and the second batch is, technically, a different batch.
A stability and compatibility request alongside the sample. Ask the plant to run its standard accelerated stability on the approved formula in your actual primary pack and to report the protocol and results. Sunscreens are prone to filter crystallisation and phase separation in the wrong pack. Approving a sample in a lab jar and filling it into an airless pump three weeks later is how a stable formula becomes an unstable product. Keep this request to physical and chemical stability; it is not an efficacy claim and should not be written as one.
The revision protocol. State in the brief that each revision request will be a single written document listing what changes and what stays fixed, and that the plant should confirm receipt of each with an expected date. This sounds bureaucratic. It is what turns "custom development in about seven days" into a predictable sequence rather than a series of surprises. The sample-order mechanics are covered in the sample order process guide.
Common questions
Can I skip the brief and just ask for the plant's existing sunscreen base?
You can, and ODM from a house formulation is what the three-day standard-sample timing is for. But you still need items 1, 2 and 3 answered before you approve it: which filters are in the base, at what concentrations, and whether they are permitted in your market. A house base is a starting point, not a shortcut past the regulatory check.
Should the brief name a specific SPF number?
Name the label target you intend to substantiate, and say that. Do not phrase it as a guarantee you expect the plant to deliver — the plant formulates toward the target; the third-party test in your name determines what you may print. Wording the brief that way keeps responsibility where every market places it: with the brand owner.
What if the plant asks for a formulation fee for custom development?
Ask what the fee covers (rounds, sample quantity, stability), whether it is credited against production, and whether the resulting formula is exclusive to you or becomes part of the plant's library. None of that is published for this factory; all of it belongs in the brief so the answer arrives with the sample, not with the invoice.
Does a mineral-only brief simplify the regulatory side?
It narrows the filter list, which can simplify cross-market design, but it makes the sensory targets harder — white cast and heaviness are the usual trade-offs — and the label claims still require the same testing. Mineral-only is a formulation choice with marketing consequences, not a compliance shortcut.
What to ask the supplier next
- Will you formulate to a named destination market's permitted-filter list, and will you return the full filter list with concentrations alongside each sample?
- Which formats do you run — lotion, cream, fluid, stick, spray — and on which lines?
- How many samples, at what mass, are included; is there a sample fee; is it credited against the pilot order?
- How many revision rounds are included before a development fee applies?
- Will you run accelerated stability in my primary pack and share the protocol?
- If you develop a custom formula for me, who owns it afterwards?
Yadun Cosmetics is a workable example of the profile to brief this way: a Guangzhou contract manufacturer established in 2009 with 100–500 staff, sunscreen and base makeup among eight lines, OEM and ODM terms, standard samples in about three days and custom development in about seven, production 15–30 days after sample approval, and its own published caution that the sun-care regulatory route must be confirmed by the buyer early. Those are company-stated terms, and the sample, fee and filter-list questions above are unpublished — put them in the brief, get the answers in writing, and read the factory profile with that brief open beside it.
