Damei Fluorocarbon Powder Coatings
Fluorocarbon and super-durable powder coatings from a Zhongshan manufacturer registered in 2018; registration pending official confirmation.
Powder coatings, fluorocarbon and super-durable chemistry.
Architectural Fluorocarbon Powder Coatings
The company’s high-end line for exterior metal finishing. Fluorocarbon (FEVE) powder coatings target the top durability grades of Qualicoat (Class 3), GSB (Florida 10) and AAMA 2605, where 10-year Florida exposure is the reference. No cure schedule, film-thickness range, pigment system or third-party exposure data has been stated — ask for the technical data sheet and the test report for the grade you need before specifying.
Super-Durable Outdoor Powder Coatings
Outdoor-grade thermosetting powders for aluminium profiles, fencing and general exterior metal. The website describes these as super-weather-resistant; no QUV hours, salt-spray rating or gloss retention figure is on record. Ask whether the system is TGIC-free — GSB certification requires powder coatings to be TGIC-free.
Chrome-Effect High-Gloss & Transparent Powders
A decorative line stated to replace liquid plating for appliances, safes, bicycles, automotive parts and solar water heaters. Includes a transparent powder sub-line. Finish, gloss level and adhesion performance are not specified — request a physical sample and the application guide.
Special-Texture & Metal-Bonding Powders
Texture finishes (net/wrinkle/hammer/sand, double-tone dot patterns) plus metal-bonded and wood-grain-effect lines, along with post-forming and high-temperature powders. These are described on the Chinese site; particle-size distribution and recommended coating conditions are not stated.
What the registry confirms, and what stays open.
Registered 2018 — Third-Party Source, Not Yet Confirmed
The company was registered on 29 August 2018 in Zhongshan, Guangdong, with RMB 10 million registered capital, according to third-party business-information platforms (Aiqicha, Qichacha and similar). The credit code passes the GB 32100 check digit (442000 = Zhongshan), but the registration facts have not been independently confirmed against the official State registry, which requires a verification code or login to read. The listing stays “registry check open” until that read is completed.
Manufacturing Stated in Scope
The registered business scope, as recorded by third-party platforms, reads in part: production and sale of fluorocarbon powder and plastic powder (excluding hazardous chemicals), plus mechanical equipment. Manufacturing of powder coatings is therefore stated in the scope. The scope text has not been read from the official registry — the production clause is recorded from third-party sources.
A Chinese-Only Website
The company operates gdzsdamei.com as a single-language Chinese site: no English version, no English product pages, and no export / overseas wording anywhere. The only English on the site is a literal company-name rendering. For a product line that maps directly onto English buyer searches (chrome effect powder coating, architectural fluorocarbon), the digital footprint in English is effectively zero.
Items Still Open
No MOQ, sampling time, production lead time, technical data sheet, safety data sheet, test report or certification (Qualicoat / GSB / AAMA or equivalent) has been supplied. This page is built from third-party registration records and the website content only; product specifications, quality records and trading terms will be updated when they arrive.
What was checked — and what the check found.
The registry check is not yet closed: the registration facts on this page come from third-party business-information platforms (Aiqicha / Qichacha and similar) and have not been independently read from the official State enterprise registry, which requires a verification code or login. The credit code's check digit was recomputed locally and passes. Manufacturing of fluorocarbon and plastic powder is stated in the recorded business scope. No certificate, test report, technical data sheet, safety data sheet or equipment list is on file, and no English website exists. This page is updated when the registry read and the company's documents are available.
A Zhongshan powder-coating maker since 2018, listed with what the record shows.
Damei Fluorocarbon Powder Coatings is Guangdong Damei Fluorocarbon New Material Co., Ltd., registered on 29 August 2018 in Zhongshan, Guangdong, with RMB 10 million registered capital. These facts come from third-party business-information platforms (Aiqicha, Qichacha and similar) and are pending independent confirmation against the official State enterprise registry — which is why this listing carries a “registry check open” status rather than the CMH Verified stamp.
The product range spans architectural fluorocarbon, super-durable outdoor, chrome-effect high-gloss, transparent and special-texture powder coatings, plus metal-bonding and wood-grain-effect lines. The company operates a Chinese-only website at gdzsdamei.com with no English version and no export wording; the only English present is a literal company-name rendering. For a product line that maps directly onto English buyer searches, the English digital footprint is effectively zero.
What is open: no MOQ, sampling time, lead time, technical data sheet, test report, safety data sheet, production-capacity figure, equipment list or certification (Qualicoat / GSB / AAMA) is on record. Manufacturing is stated in the recorded scope via third-party sources, not yet read from the official registry. This page will be updated when the registry read and the company's documents are available.
Registered in 2018, facts from third-party sources.
Company registered
Registered on 29 August 2018 in Zhongshan, Guangdong (credit code area prefix 442000). Facts from third-party business-information platforms.
Joins CMH
Listed from third-party registration records and the content of gdzsdamei.com. Manufacturing stated in scope; MOQ, certifications and test reports remain open.
Where these coatings go to work.
Architectural Aluminium Fabricators
Fluorocarbon / super-durable powder for window frames, curtain walls, cladding and architectural extrusions — confirm the grade meets Qualicoat, GSB or AAMA 2604/2605 for the destination market.
Appliance & Automotive Parts Makers
Chrome-effect high-gloss powder stated to replace liquid plating on appliances, bicycles, automotive parts and solar water heaters.
Metal Furniture & General Fabrication
Interior and exterior powder for furniture, shelving, fencing and general metal finishing.
Export Trading Companies
Sourcing fluorocarbon and super-durable powder coatings from Zhongshan for container shipments.
Sourcing guides for this category
The 27-Point China Factory Audit Checklist
Product Inspection in China Before Shipment: A Buyer's Guide
How to Request a Sample from a Chinese Factory (Without Getting Burned)
What Documents to Request From a Chinese Supplier Before Your First Order
More verified factories
Manlide Equipment
Pengxin Electronics
Shenpuneng Electronics
iCO Ceramics
Frequently Asked Questions
What does Damei make?
By the content of its Chinese website (gdzsdamei.com) and third-party registration records: thermosetting powder coatings, including architectural fluorocarbon, super-durable outdoor, chrome-effect high-gloss, transparent, special-texture (net/wrinkle/hammer/sand), metal-bonding and wood-grain-effect lines. The product pages do not specify resin systems, cure schedules, film thickness or mechanical properties.
Is this listing CMH-verified?
No. The registration facts come from third-party business-information platforms and have not been independently confirmed against the official registry, so this page carries a “registry check open” status rather than the CMH Verified stamp. Manufacturing is stated in the recorded scope; no certificate, test report or factory visit is on file.
What are fluorocarbon powder coatings used for?
Fluorocarbon (FEVE) powder coatings are the high-durability exterior option for architectural aluminium: curtain walls, window frames and cladding, where 10-year Florida exposure is the reference for Qualicoat Class 3 / GSB Florida 10 / AAMA 2605. Super-durable outdoor powders cover general exterior metal. For interior or decorative use, the chrome-effect, transparent and texture lines apply.
What compliance applies to powder coatings?
That depends on the destination and end use. In the EU, powder coatings may require REACH registration above tonnage thresholds; GSB certification requires powder coatings to be TGIC-free. VOC limits apply in several markets. For food-contact uses, specific approvals are needed. No compliance documentation is on file here — request it for your market before ordering.
What should I ask before a first order?
At minimum: the technical data sheet for each product (resin system, film thickness, cure schedule, gloss, salt-spray hours, QUV / Florida exposure data); whether the system is TGIC-free; MOQ per colour and formulation; sampling and production lead time; particle-size distribution; packaging; and any regulatory documentation (REACH, SDS, RoHS). None of these is on record here.
Talk to Damei Fluorocarbon Powder Coatings directly.
State the substrate to be coated (aluminium, mild steel, galvanised steel, etc.), the end use (architectural, appliance, furniture, automotive parts, etc.), the required finish (texture, gloss level, colour), the annual volume in tonnes, the destination country, and any performance requirements (salt-spray hours, UV resistance, QUV / Florida exposure hours). Ask for the technical data sheet, test reports and any Qualicoat / GSB / AAMA documentation, MOQ, sampling time and production lead time — none of these is on record here.