Kairuide Automation
Atmospheric, vacuum and wide-width plasma surface-treatment units, plus BGA rework, PCB cleaning, selective wave soldering and injection-moulding peripherals. Specifications transcribed from the supplier's 2026 brochure; registry check, factory audit and export certificates are open.
Three plasma platforms, one process window.
Atmospheric Plasma — RD Series
Four atmospheric units (RD-01, RD-02, RD-03, RD-06) for surface preparation before printing, coating, bonding and sealing. Power output ranges from 300–500 W on the RD-02 to 700–1200 W on the RD-06, with rotary or straight nozzles, treatment temperatures of 40–100 °C, 0.15–0.4 MPa gas input and 220 V AC supply. The units weigh roughly 15–19 kg and take a 3 m gun cable as standard. The brochure positions them for plastic, metal, glass, ceramic and rubber, and describes in-line mounting.
Vacuum Plasma — RD-ZK-01
A PLC-controlled vacuum plasma cleaner with a 1000 W source at 13.56 MHz, automatic impedance matching, a 600×600×600 mm 316 stainless chamber and two process-gas lines. The brochure names high-frequency and multilayer board activation, drilling smear removal, flex and rigid-flex cleaning, and COB/COG/COF/ACF cleaning before wire bonding and soldering as the target duties.
Wide-Width Plasma — RD-KF-01
A wide-format atmospheric unit for treating sheet or web across a wider face than a single nozzle covers. The brochure supplies the intended use (large panels and continuous substrate) rather than a measured treatment width, so the effective width and line-speed window have to be confirmed against the actual part.
SMT and Moulding Peripherals
Precision optical BGA rework, an automatic PCBA brush cleaner, selective wave soldering and a range of injection-moulding machine peripherals. The brochure presents these as the steps around plasma treatment rather than as a catalogue with model numbers and prices. Confirm the exact model, axis travel, throughput and spare parts for whichever unit the process needs.
Custom Integrated Lines
The supplier states it will build non-standard automated lines around a customer process, combining treatment, handling, soldering and inspection. No line drawing, cycle-time study or installed reference has been supplied, so treat this as a capability statement until a scope and acceptance test are agreed in writing.
What the registry confirms, and what stays open.
Brochure Specifications, Not Tested Samples
Every parameter on this page — power, chamber size, gas pressure, supply voltage — is transcribed from the supplied 2026 brochure. No unit has been inspected or measured by CMH, and no third-party test report was provided.
Registry Check Not Closed
The credit code 91440300MA5HK9DM8Q passes the local check-digit calculation and points to Shenzhen, but no enterprise-registry snapshot has been read for this listing. Registration status, registered capital, shareholder structure and business scope are therefore open, and no CMH Verified stamp is awarded.
Patents and Certificates Stated, Not Sighted
The brochure refers to several structure and process patents and to installation, commissioning and lifetime maintenance service. No patent number, certificate, test report or service agreement was supplied. Ask for the numbers and the certificate scans before relying on them.
Capacity Figures Not Supplied
Workshop area, headcount, monthly output and delivery lead time are absent from the material. This page does not estimate them. A buyer comparing suppliers should request a capacity statement and a dated delivery commitment.
Export Route to Confirm
The brochure is written for domestic sale and names no export certificate, customs code or overseas installation reference. The contracting entity, exporting entity and payment recipient for an overseas order must be confirmed in writing before a quotation is relied on.
Treatment Result Needs an Acceptance Test
Plasma treatment is judged by the result on the actual substrate, not by the machine rating. Agree the acceptance method up front — contact angle, dyne value or a peel and adhesion test on production parts — and record the pass threshold in the purchase documents.
What was checked — and what the check found.
This is an unverified supplier listing built from supplied product material. No enterprise-registry snapshot, factory audit, capacity statement, test report or export certificate has been read. No certification badge is awarded to unsighted documents. The registry check stays open on this page until it is closed with an actual record.
Plasma treatment plus the steps around it, from one supplier.
Kairuide Automation is the English listing name used here for 深圳市凯瑞德自动化设备有限公司, a Shenzhen company that supplies plasma surface-treatment equipment together with the SMT and moulding peripherals around it. The material reviewed for this listing is the company's 2026 product brochure.
The brochure describes three plasma platforms — atmospheric, vacuum and wide-width — plus BGA rework, PCB cleaning, selective wave soldering, injection-moulding peripherals and custom automated lines. The parameters shown on this page are transcribed from that brochure; no unit has been inspected, measured or tested by CMH.
Two things are deliberately left open. The enterprise-registry check has not been closed, because no registry snapshot has been read for this listing, and no factory audit, capacity statement or export certificate has been supplied. The credit code provided passes the local check-digit calculation and points to Shenzhen, which is consistent with the brochure but is not a substitute for the registry record.
Registered in Shenzhen since 2022.
Company established
The supplied brochure gives 2022 as the founding year in Shenzhen. No registry document confirming the date has been read for this listing.
Product material reviewed
CMH transcribed the product and specification content of the 2026 brochure, including the atmospheric, vacuum and wide-width platforms and the SMT peripherals.
Registry and factory audit
No enterprise-registry snapshot, factory audit, capacity statement or certificate has been supplied. The listing stays unverified until those are read.
Trial on the buyer's substrate
Agree the process window, acceptance method and spare-parts list, then run a trial on production parts before committing to a line.
Where surface energy decides the next process step.
Printing, Coating and Bonding Lines Fighting Rejection
Ink lifting, coating craters and adhesive failure usually trace back to surface energy, not to the ink or glue. Ask for the treatment width and line speed that match the existing conveyor, and for a trial on the actual substrate.
PCB and Semiconductor Assembly
Drilling smear, oxide and handling contamination before bonding or underfill are the target of the vacuum platform. Confirm chamber size against the largest panel, gas configuration against the process, and the cycle time against the line takt.
Automotive Electronics and Sensor Assembly
Potting, encapsulation and gasket bonding on housings depend on a clean, activated surface. Treatment has to fit inside the existing cell, so clearance, cycle time and fume extraction matter as much as power rating.
Medical Device and Consumable Manufacturing
Where a validated process is required, the treatment step needs documented parameters and repeatability evidence. Ask what process record the unit produces before assuming it satisfies a quality system requirement.
Sourcing guides for this category
The 27-Point China Factory Audit Checklist
Product Inspection in China Before Shipment: A Buyer's Guide
How to Request a Sample from a Chinese Factory (Without Getting Burned)
What Documents to Request From a Chinese Supplier Before Your First Order
More verified factories
NanJingLong
NanJingNan
NanJingNan
NanJingNan
Frequently Asked Questions
Is Kairuide a manufacturer or a trading company?
The supplied brochure presents the company as a manufacturer with in-house R&D, production and after-sales for plasma and SMT peripheral equipment. No factory audit has been performed and no enterprise-registry snapshot has been read, so this listing describes what the supplier states rather than what CMH has verified.
Which plasma platform fits a given substrate?
Atmospheric units suit in-line treatment of plastic, metal, glass, ceramic and rubber before printing, coating, bonding or sealing. The vacuum platform suits PCB and semiconductor cleaning where a chamber process is acceptable. Wide-width treatment suits large panels and continuous substrate. The exact choice depends on part geometry, contamination and required treatment level, and should be settled with a trial.
How is the treatment result checked?
Agree the acceptance method before purchase: contact angle measurement, dyne-value test pens, or a peel and adhesion test on production parts. A machine rating alone does not establish that a given substrate reaches the required surface energy.
Are certificates and patents available?
The brochure refers to multiple structure and process patents. No patent number, certificate, test report or declaration of conformity has been supplied to CMH. Request the numbers and scans, and confirm that any certificate names the exact model and standard that applies to the destination market.
What about installation, training and spare parts?
The brochure states on-site installation, process commissioning and lifetime maintenance for domestic customers. Overseas coverage, response time, spare-parts stock and training arrangements are not documented. Ask for a written service terms sheet and a recommended spare-parts list with the quotation.
Can the company export and invoice overseas?
The supplied material contains no export certificate, customs registration or overseas installation reference. Confirm the contracting entity, the exporting entity, the invoice issuer and the payment recipient in writing before relying on an export quotation.
Talk to Kairuide Automation directly.
Send the substrate, contamination or adhesion problem, line speed, panel or part size, the process step before and after treatment, and the destination country. Ask for the unit configuration that fits, the acceptance test (contact angle or dyne value), electrical and gas requirements, spare-parts list and a written quotation identifying the contracting and exporting entity. ChinaMakersHub will route the request.