Shenlanda Electric
A Shenzhen electrical company registered in December 2013, with production of high- and low-voltage switchgear, distribution boxes, busway, cable trays and flexible connectors in its registered scope, plus import and export. The registry check is done. Open items: product catalogue, CCC and IEC 61439 evidence, plant details and tax-arrears clearance.
Power-distribution products, as listed in the registered scope.
High- & Low-Voltage Switchgear, Distribution Boxes
Production of high- and low-voltage switchgear cabinets (高低压配电柜) and distribution boxes (配电箱) is in the registered scope. No model list, rated-current range, short-circuit rating, IP rating or type-test report has been supplied. Ask which cabinet systems are built (fixed or withdrawable, which busbar system) and which standard they are tested to.
Busway, Cable Trays & Trunking
Busway (母线槽), cable trays (电缆桥架) and trunking (线槽) are in the registered production scope. No drawings, material specification, finish (galvanised, powder-coated, stainless) or load data are on file.
Flexible Connectors, Switches, Sockets, Stabilisers & Alarms
The scope also lists flexible connectors (软连接线), electrical switches and sockets, voltage stabilisers and electrical alarm devices. Which of these are made in-house and which are traded is not confirmed — the scope covers both sale and production.
What the registry confirms, and what stays open.
Registry Read, Production in Scope
Registry snapshot dated 2026-09-29: status active (存续), established 5 December 2013, limited liability company, registry industry “electrical machinery and equipment manufacturing”. The licensed part of the scope names production of the products listed on this page; the general part adds sale, on-site repair, domestic trade and import & export of goods and technology.
Small Headcount on the Public Record
The public social-insurance record shows 4 insured staff. Registered capital is RMB 10 million, of which RMB 51,000 is shown as paid in. Neither figure says how large the workshop is; ask for the plant address, floor area, equipment list and any subcontracted operations (sheet-metal, powder coating, copper busbar) before sizing an order.
Tax-Arrears History and Address Changes
The risk scan (2026-09-29) shows no current self-risk items — no administrative penalty, abnormal-operation listing, serious violation, dishonest-debtor or enforcement record. It does show 13 historical tax-arrears notices, and the registered address has changed five times. Tax arrears are published in China and a buyer’s compliance team will find them; ask for the clearance documents before a first order.
No Certificates on File Yet
No CCC certificate, IEC 61439 type-test report, CE declaration, ISO 9001 certificate or product photo has been supplied. Low-voltage switchgear assemblies are a CCC-controlled product in China and need their own evidence in each export market; until something is sighted, this page makes no compliance claim.
What was checked — and what the check found.
Registry facts (status, founding date, capital and paid-in figure, insured staff, address, registered scope and the risk scan) come from a registry source read on 2026-09-29 and are quoted as recorded, including the tax-arrears history. The CMH Verified mark on this page means the company is registered, active, and has production and import/export in its registered scope — it is not a product or quality certification. No CCC certificate, type-test report, CE declaration, management-system certificate, workshop photo or capacity figure has been supplied. Switchgear and distribution equipment is subject to mandatory certification in China and to market-specific rules abroad; buyers should obtain and check the certificates and test reports for the exact products they order.
A Shenzhen electrical company, read off its registry.
Shenlanda Electric is the ChinaMakersHub listing name for Shenzhen Shenlanda Electric Co., Ltd. (深圳市深兰达电气有限公司), registered in Shenzhen in December 2013 and currently located in Matian Subdistrict, Guangming District.
Its registered scope names production of high- and low-voltage switchgear, distribution boxes, switches, sockets, voltage stabilisers, cable trays, trunking, busway, flexible connectors and electrical alarm devices, plus their sale and on-site repair and the import and export of goods and technology. The registry classifies it under electrical machinery and equipment manufacturing.
The public record is small: 4 insured staff, RMB 51,000 paid in against RMB 10 million registered, five address changes and 13 historical tax-arrears notices, with no current penalty, enforcement or abnormal-operation record. No product catalogue, certificate, test report or factory photo has been supplied; those are listed as open items above.
Registered in 2013, listed in 2026.
Company registered
Shenzhen Shenlanda Electric Co., Ltd. registered in Shenzhen. The registered address has since changed five times; the current one is in Guangming District.
Registry read · joins CMH
Registry and risk scan read on 2026-09-29 and quoted on this page, including the tax-arrears history. Product catalogue, certificates and plant details requested.
Who buys switchgear and distribution boxes from China.
Electrical Contractors & EPC Firms
Contractors fitting out plants, buildings and infrastructure buy distribution boards, switchgear line-ups, busway and cable management in one package. They need the single-line diagram matched, type-test evidence and a delivery schedule.
Panel Builders & Distributors
Buyers who resell enclosures, trays and busway under their own spec need drawings, material certificates and consistent finish. Confirm what is made in-house versus bought in.
Solar, Storage & Data-Centre Projects
Combiner and distribution boxes, busway and trays for PV, battery-storage and data-centre projects are bought to project standards (IEC 61439, local grid codes). Ask which of these the company has built before.
Industrial Plant Maintenance Buyers
Replacement distribution boxes, flexible connectors and voltage stabilisers for existing plants: state the original equipment ratings and the standard the site is certified to.
Sourcing guides for this category
What Documents to Request From a Chinese Supplier Before Your First Order
The 27-Point China Factory Audit Checklist
Importing from China: The Compliance Checklist by Market
How to Write a Product Spec Sheet for a Chinese Factory
More verified factories
Gostoo Furniture
Jiguang Lighting
Yixinheng Acrylic
Huihexin Technology
Frequently Asked Questions
Does Shenlanda Electric manufacture, or only trade?
Its registered scope covers both: production of switchgear, distribution boxes, busway, cable trays and related products (licensed items) and their sale and on-site repair. The public record shows 4 insured staff. Which products are built in its own workshop and which are bought in is not confirmed — ask for the plant address and equipment list.
Can it export directly?
Import and export of goods and technology is in the registered scope. Export documentation experience, customs record and past destination markets have not been supplied.
What is the tax-arrears record?
The 2026-09-29 risk scan lists 13 historical tax-arrears notices and no current self-risk items. Ask the company for the clearance documents; this page is updated when they are supplied.
Do low-voltage switchgear and distribution boxes need certification in China?
Yes. Low-voltage switchgear assemblies are in China’s compulsory product certification (CCC) catalogue and are built and tested to the GB 7251 series. No CCC certificate has been supplied for this listing; ask for the certificate number, product scope and validity.
What do export buyers usually ask for?
For low-voltage assemblies, most markets outside North America refer to IEC 61439 (busway: IEC 61439-6; cable trays: IEC 61537) and, for the EU, a Declaration of Conformity under the Low Voltage Directive. North American buyers typically require UL or CSA listing. None of this evidence is on file here; confirm what exists before quoting.
Talk to Shenlanda Electric directly.
Send the single-line diagram or the product spec: rated voltage and current, short-circuit rating, IP rating, enclosure material, the standard you buy to (IEC 61439, UL 891, GB 7251) and the target market. MOQ, sampling terms, lead time and the certificates held are not on record here yet — ask for them in the same message.