Coated · Wear-Resistant
PVD-Coated Drill Point Die
/ Drill Point Die Manufacturer CMH-F-HNVSXF
ZLD
Precision Mold
Drill point dies for self-drilling screw production from Dongguan, Guangdong — a full L1–L7 spec chart, with trial orders from one set.
Dongguan, Guangdong
Est. 2019
L1–L7 · IFI #4–#14
HSS & tungsten carbide
Production Floor
Finishing
Machining
Capacity
QC
Test
01What we build
One die line, full size coverage.
WC · Long Runs
Tungsten Carbide Die Pair
L1–L7
L-Series Coated Dies
IFI #4–#14
Die Families by Size
SKH M2 / M9 / M51
HSS & Carbide Options
OEM / ODM
Custom Dies to Drawing
02Capabilities
From carbide blank to proven die.
/ 001
Full L1–L7 Spec System
Every die code maps to a screw size (IFI #4–#14 / DIN ST2.9–ST6.3), drill diameter Dø, point and wire diameters, flute length and die style. An engineer-ready selection chart — rare in this niche — so buyers spec dies without guesswork.
/ 002
Taiwan-Rooted Craft (Company-Stated)
The founding team brings long experience with Taiwanese drill-die tooling, paired with mainland cost and delivery flexibility. The company positions itself as the stable mid-point between premium Taiwan suppliers and unverified low-cost workshops.
/ 003
HSS & Tungsten Carbide
Dies are made in SKH high-speed steel (M2 / M9 / M51) or tungsten carbide, selected by screw material, output volume and die-life target. Optional PVD coating adds surface hardness and wear resistance on high-speed lines.
/ 004
Cutting → EDM → Grinding
Blanks are cut and formed by electrical discharge machining, then precision-ground and polished for dimensional stability. Key dimensions, point geometry and surface condition are checked before packing.
/ 005
Pre-Shipment Trial-Run
In-house test equipment lets the factory trial-run dies to confirm drilling performance before shipment — for a die buyer, one trial run is worth more than any brochure.
/ 006
8-Step Custom Program
Drawing or sample in → engineering review → quote → sampling → trial production → adjustment → stable output. Two RFQ entries: send a drawing, or send photos of the screw or the old die.
03Credentials
Registration you can check — and what to ask for next.
照
Business Licence
Dongguan ZLD Precision Mold Products Co., Ltd. · USCC 91441900MA53QD3K9U · reg. capital RMB 0.5M
检
Registry Match · 2026-08
Name, USCC, status and registered address checked against the Chinese corporate registry
®
Registered Device Mark
Class 7 device mark reg. no. 49104704, held by the company since 2021
产
Manufacturing + Export in Scope
Mold & hardware manufacturing and an import/export clause both sit in the registered scope
试
Trial-Run QC On Site
In-house test equipment for pre-shipment drilling validation, documented on the company’s own site
CMH
CMH Verified
Onboarded as CMH-F-HNVSXF under registry-based verification
The company’s application form listed quality-system and inspection certificates; none have been filed with ChinaMakersHub yet, so this profile counts none of them until original documents arrive. What is on file is stronger than a scan: name, credit code, status and registered address all matched the Chinese corporate registry in August 2026; the registered scope covers mold manufacturing and an import/export clause; and the company holds a registered Class 7 device mark. On any document you are shown later, check three things: the issuing body, the holder name, and the validity date. ChinaMakersHub does not restate a supplier’s certificate validity on its behalf — we tell you what to ask for.
04About
A Dongguan die specialist with its own spec system, checked against the registry.
ZLD Precision Mold trades as Dongguan ZLD Precision Mold Products Co., Ltd. (东莞市众联达精密模具有限责任公司), incorporated in September 2019 in Dalang, Dongguan, with RMB 0.5 million registered capital. The registered business scope covers manufacturing and processing of molds, hardware and machinery parts, and includes an import-and-export clause — so the company can contract, invoice and ship under its own name. ChinaMakersHub checked the company name, credit code, registration status and registered address against the Chinese corporate registry in August 2026; all matched.
The range is deliberately narrow: drill point dies, the cold-forming tooling that shapes the drilling point of self-drilling screws. Its L1–L7 series system maps every die code to IFI #4–#14 and DIN ST2.9–ST6.3 screw sizes with drill diameter, point and wire diameters, flute length and die style (MA, MB, MC) — a selection chart an engineer can use directly. Dies are made in SKH high-speed steel (M2 / M9 / M51) or tungsten carbide, with optional PVD coating. The company traces its craft to the founding team’s long experience with Taiwanese drill-die tooling (company-stated).
On track record, the company reports a longest customer relationship of over seven years with uninterrupted reorders, peak monthly capacity above 1,000 sets, and one domestic screw maker that moved the bulk of its die orders from a Taiwan supplier to ZLD at roughly half the price. These figures are company-stated and the case names are withheld for privacy — the low-risk way to test them is the factory’s own standing offer: a trial order from a single set, with pre-shipment trial-run validation.
Two things are worth knowing up front. The application form listed quality-system and inspection certificates, none of which have been filed with CMH yet, so this profile counts none of them. And registry data shows a micro-enterprise headcount — consistent with the application’s own small-team disclosure, but confirm real capacity with a live video walkthrough or an audit before scheduling a large program. Older industry-directory listings still show a previous Dalang address; the registered address above is the current one per the registry.
05Story
Six years, one narrow product.
2019
Registered in Dalang, Dongguan
The company is incorporated on 11 September 2019 with RMB 0.5 million registered capital, manufacturing molds and hardware in Dalang, a township long known for fastener tooling.
2019–20
Early growth on record
Trade press (China Fastener Magazine’s industry portal) records the startup passing 100% compound monthly growth in its first half year, as domestic screw makers began reordering.
2021
Device mark registered
The company’s Class 7 device mark (reg. no. 49104704, filed August 2020) is granted — the first piece of formal brand asset.
2026
Joins ChinaMakersHub
Onboards as a CMH-verified factory (CMH-F-HNVSXF), opening the die range to overseas screw makers with Southeast Asia, India and the Middle East as stated target markets.
06Applications
Where these dies earn their keep.
/ 001
Roofing & Metal Envelope
Dies for roofing screws that fasten metal panels to purlins.
/ 002
Metal Building & Steel Structure
Structural fasteners drilling 3–6 mm steel.
/ 003
HVAC & Sheet Metal
Fine-point dies for thin-sheet and duct screws.
/ 004
Solar Racking
Dies for steel and aluminum PV-mounting fasteners.
/ 005
Drywall & Light Steel
Dies for drywall and light-gauge framing screws.
/ 006
General Industrial
L1–L7 selection across cross-industry fastener programs.
/ Related Reading
Sourcing guides for this category
Due Diligence
The 27-Point China Factory Audit Checklist
May 2026 · 10 min read
Read article →
Quality
Product Inspection in China Before Shipment: A Buyer's Guide
May 2026 · 8 min read
Read article →
Process
How to Request a Sample from a Chinese Factory (Without Getting Burned)
May 2026 · 5 min read
Read article →
Due Diligence
What Documents to Request From a Chinese Supplier Before Your First Order
Aug 2026 · 9 min read
Read article →
/ Related
More verified factories
Electronics · Wire Harness & Cable
Huisheng Electronics
Shenzhen, Guangdong
Wire harness and cable assembly maker in Longhua District, Shenzhen: electronic wires and charging cables, industrial control and servo cables, automotive wiri…
View Profile →
Furniture · New Chinese Solid Wood
Fanya Home
Foshan, Guangdong
Solid wood furniture maker in Shishan, Nanhai District, Foshan: Chinese-style sofa sets, coffee tables and TV cabinets, dining tables and chairs, beds and beds…
View Profile →
Furniture · Upholstery
Gostoo Furniture
Foshan, Guangdong
Custom upholstered sofas, beds, and occasional furniture.
View Profile →
Display · Custom Acrylic
Yixinheng Acrylic
Shenzhen, Guangdong
26 years making display solutions for the world's retail brands.
View Profile →
FAQ
Frequently Asked Questions
What does ZLD Precision Mold manufacture?
ZLD makes drill point dies — the cold-forming tooling that shapes the drilling point of self-drilling screws. One spec system covers it: series L1 through L7, mapping IFI #4–#14 and DIN ST2.9–ST6.3 screw sizes to drill diameter, point and wire diameters, flute length and die style (MA, MB, MC). Dies are made in SKH high-speed steel (M2 / M9 / M51) or tungsten carbide, with optional PVD coating for high-speed lines. Custom dies are built to your drawing, screw sample or old die.
Is ZLD a factory or a trading company?
The registered business scope covers manufacturing and processing of molds and hardware, and includes an import-and-export clause, so the company ships under its own name. Its own website publishes workshop, machining and trial-run photos. One thing to verify before you commit: registry data shows a micro-enterprise headcount, so confirm real capacity with a live video walkthrough or an audit before scheduling a large program.
Does ZLD hold quality-system certificates?
The application form listed quality-system and inspection certificates, but no original documents have been filed with ChinaMakersHub yet, so this profile counts none of them. What is on file: the registration itself (name, credit code, status and registered address all matched the Chinese corporate registry in August 2026) and a registered Class 7 device mark held by the company. For any certificate you are shown later, check the issuing body, the holder name and the validity date on the document itself.
What are the MOQ, sampling and lead times?
The company’s stated terms: trial orders from a single set with no minimum, standard samples in 3–4 days, custom samples in 5–7 days, and volume production in about 10 working days. These are the company’s own figures — confirm current pricing, sampling cost and lead time through ChinaMakersHub when you send your specification.
What track record does ZLD have?
The company reports that its longest customer relationship has run over seven years with uninterrupted reorders, that peak monthly capacity has topped 1,000 sets, and that one domestic screw maker moved the bulk of its die orders from a Taiwan supplier to ZLD at roughly half the price. These figures are company-stated and the case names are withheld for privacy — treat them as starting points and verify with a trial order, which the factory accepts from one set.
Talk to ZLD Precision Mold directly.
Send your screw size, point style, target volume and material preference, and the team will come back with a die configuration and a quote — or trial a single set first.
CMH Verified Supplier
ChinaMakersHub Audit Program · August 2026
Verification Checklist
Business License verified营业执照 · 91441900MA53QD3K9U · Dongguan
Company registration confirmedEstablished 2019 · Dalang, Dongguan · status active
Device mark registeredClass 7 · reg. no. 49104704 · registered 2021
Manufacturing + export in scopeMold manufacturing and import/export clause in the registered business scope
Factory & trial-run documentedWorkshop, machining and test-run photos published on the company’s own site
Certification status flaggedApplication listed quality-system certificates · none on file with CMH yet
Scale flaggedRegistry shows micro-enterprise headcount · confirm capacity via audit or video walkthrough
| Brand / Make | |
| Configuration | |
| Feature | |
| MOQ | |
| Sample | 3–4 d std · 5–7 d custom (stated) |
| Lead Time | 10 working days (stated) |
| Payment | Terms confirmed at inquiry via CMH |